FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/my Ram 1500 DT (2019-Present) has a P0130 code, how do I fix that?

my Ram 1500 DT (2019-Present) has a P0130 code, how do I fix that?

Ram 1500 DT (2019-Present)

Error Codes
Severity: mediumDifficulty: mediumError Code: P01301-2 hours
3 min read
488 words

Problem Statement

Learn how to diagnose and fix P0130 oxygen sensor circuit issue in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0130
Affected Component
Exhaust System
Estimated Time
1-2 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the exhaust system to cool before handling the oxygen sensor.

Symptoms

  • •Check engine light illuminated
  • •Reduced fuel efficiency
  • •Rough engine idle
  • •Engine stalling during acceleration
  • •Increased emissions
  • •Poor engine performance

Diagnostic Steps

  1. 1Scan the vehicle's onboard diagnostics using an OBD-II scanner to confirm the P0130 code.
  2. 2Inspect the wiring and connectors leading to the upstream oxygen sensor for any visible damage or corrosion.
  3. 3Check the oxygen sensor's heater circuit using a multimeter to ensure it is functioning correctly.
  4. 4Test the oxygen sensor's voltage signal using a multimeter while the engine is running to verify the sensor's response.
  5. 5Inspect the exhaust system for any leaks that may affect sensor readings.
  6. 6Clear the codes and take the vehicle for a test drive to see if the P0130 code returns.

Solution

Solution

1. Preparation

  • Gather tools and parts needed for the repair.
  • Disconnect the negative battery terminal to prevent electrical shorts.
  • Ensure the vehicle is on a flat surface and safely supported.

2. Remove the Upstream Oxygen Sensor

  • Locate the upstream oxygen sensor on Bank 1 (usually near the exhaust manifold).
  • Use a wrench or oxygen sensor socket to carefully unscrew and remove the old sensor.
  • Inspect the sensor threads for damage and clean the mounting area if necessary.

3. Install the New Oxygen Sensor

  • Apply anti-seize compound to the threads of the new oxygen sensor to ensure a proper seal (avoid getting it on the sensor element).
  • Hand-tighten the new sensor into the exhaust manifold, then use a wrench to secure it, tightening to the manufacturer’s specifications (typically around 30-35 ft-lbs).
  • Reconnect the electrical connector to the new oxygen sensor.

4. Reconnect Battery and Test

  • Reconnect the negative battery terminal.
  • Start the engine and allow it to reach operating temperature.
  • Use an OBD-II scanner to check for any stored codes and ensure the P0130 code is cleared.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Wrench set or oxygen sensor socket
  • •Multimeter
  • •Anti-seize compound

Parts Required

  • •New upstream oxygen sensor

Additional Information

Error Code
P0130
Affected Component
Exhaust System
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
1 item

Related Faults

  1. why does my Ram 1500 DT (2019-Present) AC blow warm air

    Complete guide to fixing AC that blows warm air in Ram 1500 DT. Includes symptoms, diagnostic steps, tools required, and repair procedures.

    HVAC6 symptoms

  2. how to fix Ram 1500 DT (2019-Present) U-joint vibrations

    Learn how to diagnose and fix U-joint vibrations in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Suspension5 symptoms

  3. how to fix Ram 1500 DT (2019-Present) fuel economy issues

    Learn how to diagnose and fix fuel economy issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Fuel System6 symptoms

  4. why does my Ram 1500 DT (2019-Present) have a delay in shifting

    Learn how to diagnose and fix transmission delay issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission6 symptoms

  5. my Ram 1500 loses RPMs while driving what's the problem

    Learn how to diagnose and fix engine RPM loss in Ram 1500. Step-by-step guide with symptoms, diagnostic steps, tools, and repair instructions.

    Engine6 symptoms

  6. how to tell if my Ram 1500 DT (2019-Present) struts are worn out?

    Learn how to diagnose and replace worn struts on a 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Suspension6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation