FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Ram 1500 DT (2019-Present) traction control light keeps coming on - Ram 1500
Home/Cars/Ram/1500/DT (2019-Present)/my Ram 1500 DT (2019-Present) traction control light keeps coming on

my Ram 1500 DT (2019-Present) traction control light keeps coming on

Ram 1500 DT (2019-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
510 words

Problem Statement

Learn how to diagnose and fix the traction control light issue in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before performing any inspections.

Symptoms

  • •Traction control light illuminated on the dashboard
  • •Unresponsive traction control system
  • •Vehicle may experience unintended wheel slip during acceleration
  • •Reduced engine power in certain driving conditions
  • •Possible ABS warning light activated simultaneously

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter

Parts Required

  • •Wheel speed sensor (if faulty)
  • •Brake light switch (if faulty)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
3 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to prevent electrical shorts.
2. Inspect Wheel Speed Sensors
  • Tools Required: Socket set, multimeter
  • Remove the wheel and tire assembly.
  • Locate the wheel speed sensor; disconnect the wiring harness.
  • Use a multimeter to check the sensor's resistance (should be within manufacturer specifications).
  • Clean the sensor and its mounting area; reassemble if no issues are found.
3. Check ABS Module and Wiring
  • Tools Required: Socket set
  • Access the ABS module, typically located near the brake master cylinder.
  • Visually inspect the wiring harness for frays, corrosion, or loose connections.
  • Clean any corrosion found and secure loose connections.
  • Reconnect the wiring and ensure all connections are tight.
4. Test Brake Light Switch
  • Tools Required: Multimeter
  • Locate the brake light switch, usually mounted near the brake pedal.
  • Disconnect the switch and test for continuity with the multimeter while pressing the brake pedal.
  • Replace the switch if it does not show continuity when engaged.
5. Battery and Electrical Check
  • Tools Required: Multimeter
  • Reconnect the battery terminal.
  • Use the multimeter to test the battery voltage; it should read around 12.6 volts or higher.
  • Inspect battery terminals for tightness and corrosion.