what does it mean when my Ram 1500 DT (2019-Present) shows a P0700 code

Solution

1. Preparation

• Gather necessary tools and parts.
• Disconnect the negative battery terminal to prevent electrical shorts.

2. Check and Replace Transmission Fluid

• Sub-steps:
  1. Raise the vehicle securely on jack stands.
  2. Locate the transmission dipstick or fill plug.
  3. Remove the dipstick/fill plug and check the fluid level; add the appropriate transmission fluid type if low.
  4. If the fluid is contaminated or burnt, drain the transmission fluid using a pan and replace it with new fluid.
• Tools Required:
  • Transmission fluid pump
  • Fluid catch pan

3. Inspect and Repair Wiring

• Sub-steps:
  1. Visually inspect the wiring harness connected to the TCM and transmission for signs of wear, corrosion, or loose connections.
  2. Repair or replace any damaged wires or connectors.
• Tools Required:
  • Wire strippers
  • Electrical tape

4. Replace Transmission Control Module (if necessary)

• Sub-steps:
  1. Locate the TCM, typically found near the transmission or under the dashboard.
  2. Disconnect the wiring harness from the TCM.
  3. Remove the mounting bolts and carefully take out the TCM.
  4. Install the new TCM by reversing the removal steps.
  5. Reconnect the battery terminal.
• Tools Required:
  • Socket set
  • Torque wrench (check specific torque values for TCM)