FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/why does my Ram 1500 DT (2019-Present) have a check engine light with P0174?

why does my Ram 1500 DT (2019-Present) have a check engine light with P0174?

Ram 1500 DT (2019-Present)

Error Codes
Severity: mediumDifficulty: mediumError Code: P01742-4 hours
4 min read
640 words

Problem Statement

Learn how to diagnose and fix P0174 lean condition in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0174
Affected Component
Engine
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before inspecting the intake and exhaust systems.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or unstable engine performance
  • •Decreased engine power or acceleration
  • •Poor fuel economy
  • •Engine stalling or hesitation during acceleration

Diagnostic Steps

  1. 1Scan the vehicle's onboard computer using an OBD-II scanner to confirm the P0174 code and check for any additional codes.
  2. 2Inspect the air intake system for any leaks or cracks, including the intake manifold and vacuum hoses.
  3. 3Check the mass air flow (MAF) sensor for dirt or damage; clean or replace as necessary.
  4. 4Inspect the fuel delivery system, including fuel pressure and fuel filter condition.
  5. 5Examine the oxygen sensors for proper operation and check their readings.
  6. 6Test for any intake manifold gasket leaks using a smoke test or by listening for hissing sounds.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the vehicle battery to prevent electrical shorts.
  • Ensure the vehicle is on a level surface and engage the parking brake.

2. Inspect and Repair Air Intake System

  • Tools Required: Screwdriver set, pliers, flashlight.
  • Sub-steps:
    1. Visually inspect all components of the air intake system for signs of wear, cracks, or loose connections.
    2. Tighten or replace any damaged clamps or hoses.
    3. Replace any damaged vacuum hoses.
    4. Ensure the air filter is clean; replace if necessary.

3. Clean or Replace MAF Sensor

  • Tools Required: MAF cleaner or electrical contact cleaner.
  • Sub-steps:
    1. Remove the MAF sensor from the intake duct.
    2. Spray the sensor element with MAF cleaner and allow it to dry.
    3. Reinstall the MAF sensor and ensure all connections are secure.

4. Check Fuel Delivery System

  • Tools Required: Fuel pressure gauge and appropriate wrenches.
  • Sub-steps:
    1. Connect the fuel pressure gauge to the fuel rail.
    2. Turn the ignition to the "ON" position (do not start the engine) and check the pressure reading; it should match manufacturer specifications.
    3. If pressure is low, inspect the fuel pump and replace the fuel filter as necessary.

5. Inspect and Replace Oxygen Sensors (if needed)

  • Tools Required: O2 sensor socket, wrench set.
  • Sub-steps:
    1. Locate the upstream and downstream oxygen sensors.
    2. Unplug the electrical connectors and remove the sensors from the exhaust system.
    3. Install new sensors and reconnect the electrical connectors.

6. Verify Intake Manifold Gasket

  • Tools Required: Smoke machine (optional) or soapy water.
  • Sub-steps:
    1. Perform a smoke test to detect any leaks in the intake manifold gasket.
    2. Replace the intake manifold gasket if leaks are detected.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Screwdriver set
  • •Pliers
  • •Flashlight
  • •Fuel pressure gauge
  • •O2 sensor socket
  • •Smoke machine (optional)

Parts Required

  • •Air filter
  • •MAF sensor cleaner
  • •Oxygen sensors (if needed)
  • •Intake manifold gasket (if needed)
  • •Fuel filter (if needed)

Additional Information

Error Code
P0174
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
7 items
Parts Required
5 items

Related Faults

  1. why does my Ram 1500 DT (2019-Present) make a grinding noise when starting

    Learn how to diagnose and fix grinding noise during starting in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical5 symptoms
  2. why is my Ram 1500 DT (2019-Present) oil pressure warning light on

    Learn how to diagnose and fix the oil pressure warning light issue in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Engine6 symptoms
  3. why is my Ram 1500 DT (2019-Present) making a popping noise from the exhaust

    Learn how to diagnose and fix popping noise from exhaust in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Exhaust System5 symptoms
  4. how to fix Ram 1500 DT (2019-Present) torque converter shudder

    Learn how to diagnose and fix torque converter shudder in 2019-Present RAM 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission5 symptoms
  5. why is my Ram 1500 DT (2019-Present) battery draining overnight

    Learn how to diagnose and fix battery drain issues in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical5 symptoms
  6. why is my Ram 1500 DT (2019-Present) transmission fluid brown

    Learn why your 2019 Ram 1500 DT has brown transmission fluid and how to fix it. Step-by-step guide with diagnostic steps and repair instructions.

    Transmission5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation