FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/why is my Ram 1500 DT (2019-Present) losing power when I press the gas

why is my Ram 1500 DT (2019-Present) losing power when I press the gas

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: medium2-4 hours
3 min read
575 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix engine power loss in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Component
Engine
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Relieve fuel system pressure to avoid fuel spray during fuel filter replacement.
  • ⚠Allow the engine to cool before working on any components.

Symptoms

  • •Engine stalling during acceleration
  • •Check engine light illuminated
  • •Rough idling or misfiring
  • •Decreased throttle response
  • •Poor fuel economy
  • •Unusual engine noises (e.g., knocking or pinging)

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to identify any underlying issues.
  2. 2Inspect the air intake system for blockages or leaks that might restrict airflow.
  3. 3Check fuel pressure with a fuel pressure gauge to ensure the fuel pump is delivering the proper pressure.
  4. 4Inspect the throttle body for carbon buildup or mechanical failures.
  5. 5Examine spark plugs for wear or fouling that could lead to misfiring.
  6. 6Test the mass airflow (MAF) sensor to verify its proper operation.

Solution

Solution

1. Preparation

  • Gather tools and parts needed for repair.
  • Disconnect the negative terminal of the battery.
  • Ensure the vehicle is on a flat surface and securely lifted if necessary.

2. Inspect and Clean the Throttle Body

  • Remove the air intake duct to access the throttle body.
  • Use throttle body cleaner and a soft cloth to gently clean the throttle plate and surrounding areas.
  • Reattach the air intake duct securely.

3. Replace Fuel Filter (if applicable)

  • Locate the fuel filter (may be integrated with the fuel pump).
  • Relieve fuel system pressure by removing the fuse for the fuel pump and starting the engine until it stalls.
  • Disconnect fuel lines (use safety glasses to protect against fuel spray).
  • Remove and replace the fuel filter with a new one, ensuring proper orientation.
  • Reconnect the fuel lines and fuse, then turn the ignition to the ON position to prime the system.

4. Replace Spark Plugs

  • Remove the ignition coil packs using a socket set.
  • Unscrew the old spark plugs using a spark plug socket.
  • Inspect and replace with new spark plugs, ensuring the correct gap (refer to owner’s manual).
  • Reinstall the ignition coil packs and secure them.

5. Test Drive

  • Reconnect the negative battery terminal.
  • Start the engine and allow it to idle for a few minutes.
  • Test drive the vehicle to ensure power loss issue is resolved.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Socket set
  • Throttle body cleaner
  • Fuel pressure gauge
  • Spark plug socket
  • Torque wrench

Parts Required

  • Throttle body cleaner
  • Fuel filter (if applicable)
  • Spark plugs
  • Air intake duct clamps (if damaged)

Additional Information

Component

Engine

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

6 items

Parts

4 items

Related Faults

  1. why does my Ram 1500 DT (2019-Present) have a coolant leak

    Learn how to diagnose and fix coolant leaks in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Cooling System6 symptoms

  2. how to troubleshoot Ram 1500 DT (2019-Present) power steering issues

    Learn how to troubleshoot and fix power steering issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostics, and repair instructions.

    Steering5 symptoms

  3. my Ram 1500 DT (2019-Present) won't shift into gear what could be wrong

    Learn how to diagnose and fix transmission shifting issues in 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission5 symptoms

  4. why does my Ram 1500 DT (2019-Present) feel like it's losing power while driving

    Learn how to diagnose and fix loss of power issues in 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  5. how to fix the brakes on my Ram 1500 DT (2019-Present) that go to the floor

    Learn how to fix the brake pedal sinking issue in 2019-Present Ram 1500 DT. Step-by-step guide with diagnostic steps and repair instructions.

    Brakes5 symptoms

  6. why does my Ram 1500 DT (2019-Present) dashboard light flicker

    Learn how to diagnose and fix dashboard light flickering in 2019 Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation