how do I reset the maintenance light on my Renault Clio V (2019-Present)

Renault Clio V (2019-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

354 words

Problem Statement

Learn how to reset the maintenance light on your Renault Clio V (2019-Present) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before performing the reset.

Symptoms

•Maintenance light remains illuminated on the dashboard
•No other warning lights present
•Recent oil change or service performed

Diagnostic Steps

1
Ensure that the vehicle is in the 'OFF' position.
2
Insert the key into the ignition or press the start button without pressing the brake pedal to enter the 'ON' position.
3
Navigate to the trip computer using the button on the steering wheel.
4
Locate the 'Service Interval' or 'Maintenance' option in the trip computer settings.
5
Press and hold the button until the maintenance light starts to blink and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure that the vehicle is in the 'OFF' position.
2
Insert the key into the ignition or press the start button without pressing the brake pedal to enter the 'ON' position.
3
Navigate to the trip computer using the button on the steering wheel.
4
Locate the 'Service Interval' or 'Maintenance' option in the trip computer settings.
5
Press and hold the button until the maintenance light starts to blink and then turns off.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather tools: none are required for this procedure.

2. Accessing the Ignition

Insert the key into the ignition or press the start button to turn the vehicle to the "ON" position without starting the engine.

3. Navigating to the Trip Computer

Use the trip computer button on the steering wheel to cycle through the options displayed on the dashboard until you reach the "Service Interval" or "Maintenance" option.

4. Resetting the Maintenance Light

Press and hold the trip computer button for approximately 10 seconds until the maintenance light blinks.
Release the button, and the maintenance light should turn off, indicating a successful reset.