FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Renault/Clio/V (2019-Present)/how to clear a P0171 code on Renault Clio V (2019-Present)

how to clear a P0171 code on Renault Clio V (2019-Present)

Renault Clio V (2019-Present)

Error Codes
Severity: mediumDifficulty: mediumError Code: P01712-4 hours
3 min read
573 words

Problem Statement

Learn how to diagnose and fix P0171 engine lean condition in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0171
Component
Engine
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical components.
  • ⚠Allow the engine to cool down before inspecting or working on the intake system.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or stalling
  • •Decreased acceleration or power loss
  • •Poor fuel economy
  • •Increased emissions during testing

Diagnostic Steps

  1. 1Scan the vehicle's onboard diagnostics using an OBD-II scanner to confirm the P0171 code.
  2. 2Inspect the air intake system for leaks, including the intake manifold and vacuum hoses.
  3. 3Check the mass air flow (MAF) sensor for proper operation and cleanliness.
  4. 4Inspect fuel system components, including fuel pressure and fuel filter condition.
  5. 5Examine the oxygen sensors for proper functionality and any signs of wear or damage.
  6. 6Review the engine coolant temperature sensor readings for accuracy.

Solution

Solution

1. Preparation

  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface, and the engine is cool.

2. Inspect and Repair Air Intake System

  • Tools Required: Screwdriver set, vacuum gauge.
  • Check all hoses and connections for leaks. Replace any damaged hoses.
  • If leaks are found, use appropriate sealants or replace hose assemblies as needed.

3. Clean or Replace MAF Sensor

  • Tools Required: MAF sensor cleaner, torx or socket set.
  • Disconnect the MAF sensor electrical connector.
  • Remove the MAF sensor from the air intake duct.
  • Clean the MAF sensor using an appropriate cleaner and let it dry. If damaged, replace it with a new sensor.

4. Check Fuel System

  • Tools Required: Fuel pressure gauge.
  • Connect the fuel pressure gauge to the fuel rail.
  • Turn the ignition on (do not start the engine) and check the fuel pressure. It should meet manufacturer specifications.
  • If low, check the fuel pump and fuel filter. Replace as necessary.

5. Inspect Oxygen Sensors

  • Tools Required: O2 sensor socket, multimeter.
  • Check the front oxygen sensor for proper voltage and response time using a multimeter.
  • If faulty, replace the oxygen sensor with a new one, ensuring it is compatible with the Clio V.

6. Clear the Code

  • Reconnect the battery if it was disconnected.
  • Use the OBD-II scanner to clear the P0171 code from the ECM.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Screwdriver set
  • Vacuum gauge
  • Fuel pressure gauge
  • MAF sensor cleaner
  • O2 sensor socket
  • Multimeter

Parts Required

  • Replacement hoses (if damaged)
  • MAF sensor (if faulty)
  • Fuel filter (if needed)
  • Oxygen sensor (if defective)

Additional Information

Error CodeP0171
Component

Engine

Repair Time

2-4 hours

Difficulty

medium

Severity

medium

Tools

7 items

Parts

4 items

Related Faults

  1. how to fix P0420 code on Renault Clio V (2019-Present)

    Learn how to diagnose and fix P0420 code related to catalytic converter efficiency in Renault Clio V. Step-by-step guide with tools and procedures.

    P0420Exhaust System6 symptoms
  2. how to resolve P0300 random misfire code in Renault Clio V (2019-Present)?

    Learn how to diagnose and fix P0300 random misfire in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    P0300Engine5 symptoms
  3. why is my Renault Clio V (2019-Present) making a whining noise when driving?

    Learn how to diagnose and fix whining noise in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    Steering5 symptoms
  4. how to fix P0420 code in Renault Clio V (2019-Present)

    Learn how to diagnose and fix P0420 catalytic converter efficiency issue in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    P0420Exhaust System5 symptoms
  5. how to fix P0171 code in Renault Clio V (2019-Present)

    Learn how to diagnose and fix P0171 engine too lean condition in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    P0171Engine5 symptoms
  6. why does my Renault Clio V (2019-Present) air conditioning smell bad

    Learn how to diagnose and fix bad smells from the air conditioning in your Renault Clio V. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    HVAC5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation