how to fix my Renault Clio V (2019-Present) shaking when I brake

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

439 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking when braking in Renault Clio V (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported on jack stands before working underneath.
•Allow the brakes to cool before handling brake components.

Symptoms

•Steering wheel shakes or vibrates when braking
•Pulsation felt in the brake pedal
•Uneven wear on brake pads
•Vehicle pulls to one side during braking
•Increased stopping distance

Diagnostic Steps

1
Inspect brake pads for uneven wear and thickness.
2
Check brake rotors for warping or scoring using a dial indicator.
3
Examine suspension components for wear or damage.
4
Verify wheel alignment and balance.
5
Inspect tires for uneven wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Floor jack
•Jack stands
•Lug wrench
•Torque wrench
•Dial indicator
•Brake cleaner

Parts Required

•Brake pads (if worn)
•Brake rotors (if warped)
•Wheel alignment parts (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Use wheel chocks to prevent movement.

2. Lift Vehicle

Tools Required: Floor jack, jack stands
Sub-steps:
1. Use the floor jack to lift the front of the vehicle.
2. Secure the vehicle on jack stands.

3. Remove Wheels

Tools Required: Lug wrench
Sub-steps:
1. Loosen the lug nuts on the front wheels.
2. Remove the lug nuts and take off the wheels.

4. Inspect Brake Components

Tools Required: Torque wrench, dial indicator
Sub-steps:
1. Check brake pads for uneven wear; replace if necessary.
2. Measure rotor thickness and runout using a dial indicator. Replace warped rotors.
3. Clean rotors and brake components with brake cleaner.

5. Reassemble and Reinstall

Tools Required: Torque wrench
Sub-steps:
1. Reinstall the wheels and hand-tighten the lug nuts.
2. Lower the vehicle off the jack stands.
3. Torque the lug nuts to the manufacturer's specifications (usually around 80-100 ft-lbs).

6. Test Drive

Sub-steps:
1. Conduct a test drive to assess brake performance.
2. Monitor for any remaining vibrations or issues.