how to fix P0130 code on Renault Clio V (2019-Present)?

Solution

1. Preparation

• Gather necessary tools and parts.
• Disconnect the battery to ensure safety during repairs.
• Ensure the vehicle is on a level surface and secured with jack stands if lifting is necessary.

2. Inspect and Replace Oxygen Sensor

1. Locate the Oxygen Sensor:
   • Find the upstream oxygen sensor on the exhaust manifold or near the catalytic converter.
2. Remove the Oxygen Sensor:
   • Use an oxygen sensor socket to carefully unscrew the sensor from the exhaust system.
   • If necessary, apply penetrating oil to the threads to ease removal.
3. Install the New Oxygen Sensor:
   • Apply a small amount of anti-seize compound to the threads of the new sensor.
   • Screw in the new oxygen sensor by hand to avoid cross-threading, then tighten with the oxygen sensor socket to the manufacturer's specified torque (usually around 30-40 Nm, but check the service manual).
4. Reconnect the Electrical Connector:
   • Ensure the connector clicks securely onto the new oxygen sensor.

3. Check Wiring and Connections

• Inspect the wiring harness and connectors for any signs of wear or damage.
• Repair or replace any damaged wiring or connectors as necessary.

4. Reconnect Battery and Clear Codes

• Reconnect the negative terminal of the battery.
• Use the OBD-II scanner to clear the P0130 code from the vehicle's computer.

5. Test Drive the Vehicle

• Take the vehicle for a test drive to allow the engine to reach operating temperature and complete any readiness monitors.