how to fix the P0130 oxygen sensor code in Renault Clio V (2019-Present)

Solution

1. Preparation

• Gather necessary tools and parts.
• Disconnect the vehicle battery to ensure safety during repairs.
• Allow the engine to cool before proceeding with any work.

2. Remove the Oxygen Sensor

• Locate the upstream oxygen sensor (usually found before the catalytic converter).
• Disconnect the electrical connector from the oxygen sensor.
• Use an oxygen sensor socket or appropriate wrench to carefully unscrew the oxygen sensor from the exhaust manifold.
• Ensure to keep the area clean to prevent contamination.

3. Inspect and Clean

• Visually inspect the threads and the connector of the oxygen sensor for any damage.
• Clean the area around the mounting hole on the exhaust manifold to remove any debris or carbon buildup.
• If necessary, use a wire brush to clean the threads of the oxygen sensor port.

4. Install New Oxygen Sensor

• Apply a small amount of anti-seize compound to the threads of the new oxygen sensor (if not pre-coated).
• Screw the new oxygen sensor into the exhaust manifold by hand to avoid cross-threading, then tighten it to the manufacturer's torque specification (typically around 30-40 Nm).
• Reconnect the electrical connector securely.

5. Reconnect Battery and Test

• Reconnect the vehicle battery.
• Start the engine and allow it to reach operating temperature.
• Monitor the oxygen sensor readings with an OBD-II scanner to ensure it is functioning correctly.