how to reset the maintenance light on my Renault Clio V (2019-Present)

Renault Clio V (2019-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

364 words

Problem Statement

Learn how to reset the maintenance light on your Renault Clio V (2019-present) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral and on a flat surface before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Message indicating service is due
•Check engine light may also be present if other issues exist

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position and all doors are closed.
2
Insert the key into the ignition or press the start button without starting the engine.
3
Access the odometer display by pressing the trip reset button located on the dashboard.
4
Navigate to the 'Service' or 'Maintenance' menu using the controls on the steering wheel or dashboard.
5
Confirm that you are in the correct menu before proceeding to reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position and all doors are closed.
2
Insert the key into the ignition or press the start button without starting the engine.
3
Access the odometer display by pressing the trip reset button located on the dashboard.
4
Navigate to the 'Service' or 'Maintenance' menu using the controls on the steering wheel or dashboard.
5
Confirm that you are in the correct menu before proceeding to reset.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked on level ground with the ignition off.

2. Turn On Ignition

Insert the key into the ignition or press the start button to turn on the vehicle's electrical system without starting the engine.

Use the trip reset button to cycle through the dashboard display until the maintenance light or service menu is displayed.

4. Reset the Maintenance Light

Hold the trip reset button down for a few seconds until the maintenance light blinks and then turns off.
Release the trip reset button once the light is reset.

5. Verify the Reset

Turn off the ignition and then restart the vehicle to ensure the maintenance light remains off.