how to reset the service light on my Renault Clio V (2019-Present)?

Renault Clio V (2019-Present)

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

354 words

Problem Statement

Learn how to reset the service light on your Renault Clio V (2019-Present) with this step-by-step guide. Quick and easy instructions for maintenance.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

1
Ensure the vehicle is parked and the ignition is turned off.
2
Insert the key into the ignition or press the start button without starting the engine.
3
Press the accelerator pedal fully three times within 10 seconds.
4
Turn the ignition key to the 'On' position without starting the engine or press the start button once.
5
Wait for the service light to flash and then turn off.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is parked and the ignition is turned off.
2
Insert the key into the ignition or press the start button without starting the engine.
3
Press the accelerator pedal fully three times within 10 seconds.
4
Turn the ignition key to the 'On' position without starting the engine or press the start button once.
5
Wait for the service light to flash and then turn off.

Solution

1. Preparation

2. Resetting the Service Light

Ignition Position: Insert the key into the ignition and turn it to the "On" position (do not start the engine) or press the start button without pressing the brake pedal.
Accelerator Pedal: Fully depress the accelerator pedal three times within a 10-second window.
Turn Off and On: After the third pedal depression, turn off the ignition and then turn it back to the "On" position again without starting the engine.
Check Light Status: Observe the dashboard for the service light. It should flash briefly and then turn off, indicating a successful reset.