how to reset the service light on Renault Clio V (2019-Present)?

Renault Clio V (2019-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

368 words

Problem Statement

Learn how to reset the service light on your Renault Clio V (2019-Present) after maintenance. Step-by-step instructions for a successful reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in 'On' position without starting the engine to prevent any accidental movement.

Symptoms

•Service light illuminated on the dashboard
•Incorrect service interval reminder
•Vehicle maintenance performed but light remains on

Diagnostic Steps

1
Ensure the vehicle is in 'On' position without starting the engine.
2
Locate the 'Trip' button on the dashboard or steering wheel controls.
3
Check the odometer display for the current trip meter reading.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for reset

Parts Required

•None required for reset

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Turn off any electronic accessories (radio, lights) to avoid battery drain.

2. Turn on the Ignition

Insert the key into the ignition or press the start button to turn on the vehicle without starting the engine.
Wait until all dashboard lights illuminate, then proceed.

3. Access the Service Reset Mode

Press and hold the "Trip" button until the trip meter resets to zero.
Keep holding the button until the service light starts to blink.

4. Confirm the Reset

Release the "Trip" button after the service light blinks.
Check that the service light turns off completely, indicating the reset is successful.

5. Turn Off the Ignition

Turn off the ignition completely by removing the key or pressing the start button again.
Wait a few seconds and then turn the ignition back on to confirm the service light is off.