FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Renault/Clio/V (2019-Present)/how to resolve P0421 code in Renault Clio V (2019-Present)

how to resolve P0421 code in Renault Clio V (2019-Present)

Renault Clio V (2019-Present)

Error Codes
Severity: mediumDifficulty: mediumError Code: P04212-4 hours
3 min read
591 words

Problem Statement

Learn how to diagnose and fix P0421 exhaust system issue in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0421
Component
Exhaust System
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the exhaust system to cool before servicing to avoid burns.

Symptoms

  • •Check engine light illuminated
  • •Increased exhaust emissions
  • •Poor fuel economy
  • •Rough idle
  • •Loss of engine power during acceleration

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm the P0421 code.
  2. 2Inspect the exhaust system for any visible leaks or damage, especially before the catalytic converter.
  3. 3Check the oxygen sensors’ operation using a multimeter or scan tool to assess voltage readings.
  4. 4Measure the temperature difference between the inlet and outlet of the catalytic converter with a thermocouple.
  5. 5Inspect the fuel system, ensuring the fuel pressure is within specifications and the fuel filter is clean.
  6. 6Verify the engine coolant temperature sensor reading to ensure the engine reaches the proper operating temperature.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the battery to avoid electrical issues during the repair.
  • Ensure the vehicle is parked on a level surface and secure it with wheel chocks.

2. Inspect and Replace Oxygen Sensors

  • Tools Required: O2 sensor socket, wrench, OBD-II scanner
  • Remove the upstream (pre-catalytic converter) oxygen sensor first.
    • Disconnect the sensor’s electrical connector.
    • Use the O2 sensor socket to unscrew the sensor from the exhaust manifold.
  • Install the new oxygen sensor.
    • Apply anti-seize compound to the threads of the new sensor.
    • Screw it into place and tighten to the manufacturer's specifications (typically around 30 lb-ft).
  • Reconnect the electrical connector.

3. Inspect and Replace the Catalytic Converter

  • Tools Required: Socket set, exhaust pipe cutter, gasket scraper, high-temperature exhaust sealant
  • Remove the bolts securing the catalytic converter to the exhaust system.
    • Use a socket set to take off the flange and support brackets.
  • If necessary, cut the exhaust pipes using an exhaust pipe cutter.
  • Install the new catalytic converter.
    • Ensure proper alignment with the exhaust system and secure with new bolts.
    • Apply high-temperature exhaust sealant on the joints to prevent leaks.
  • Tighten all fasteners to the manufacturer's torque specifications.

4. Clear Codes and Test Drive

  • Reconnect the battery and use the OBD-II scanner to clear the P0421 code.
  • Start the engine and allow it to reach operating temperature.
  • Perform a test drive to ensure the engine operates normally and monitor for the check engine light.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • O2 sensor socket
  • Wrench set
  • Socket set
  • Exhaust pipe cutter
  • Thermocouple

Parts Required

  • Upstream oxygen sensor
  • Catalytic converter
  • Exhaust gaskets

Additional Information

Error CodeP0421
Component

Exhaust System

Repair Time

2-4 hours

Difficulty

medium

Severity

medium

Tools

6 items

Parts

3 items

Related Faults

  1. my Renault Clio V's engine light is flashing, is it serious?

    Learn how to diagnose and fix a flashing engine light issue in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    Engine6 symptoms
  2. how to fix air conditioning not blowing cold in Renault Clio V (2019-Present)

    Learn how to diagnose and fix the air conditioning not blowing cold in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    HVAC5 symptoms
  3. why does my Renault Clio V (2019-Present) make a grinding noise when braking?

    Learn how to diagnose and fix grinding noise when braking in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    Brakes6 symptoms
  4. how to fix the P0130 code on my Renault Clio V (2019-Present)?

    Learn how to diagnose and fix P0130 oxygen sensor circuit issues in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    P0130Exhaust System5 symptoms
  5. how to fix the P0456 code on my Renault Clio V (2019-Present)?

    Learn how to diagnose and fix P0456 EVAP leak in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    P0456Fuel System5 symptoms
  6. why does my Renault Clio V's windshield wipers stop working?

    Learn how to diagnose and fix windshield wipers not working on Renault Clio V. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Electrical5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation