FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Renault/Clio/V (2019-Present)/my Renault Clio V (2019-Present) has a check engine light and I think it’s P0301, what should I do?

my Renault Clio V (2019-Present) has a check engine light and I think it’s P0301, what should I do?

Renault Clio V (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P03012-4 hours
4 min read
621 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0301 cylinder 1 misfire in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0301
Affected Component
Engine
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect battery before working on electrical systems.
  • ⚠Allow engine to cool before opening any components.

Symptoms

  • •Check engine light illuminated
  • •Rough engine idle
  • •Decreased acceleration or power
  • •Increased fuel consumption
  • •Engine stalling during idle or low-speed conditions

Diagnostic Steps

  1. 1Scan the vehicle’s OBD-II system to confirm the presence of code P0301.
  2. 2Inspect spark plugs and ignition coils for signs of wear or damage.
  3. 3Check the fuel injector for cylinder 1 for proper functionality.
  4. 4Perform a compression test on cylinder 1 to check for mechanical issues.
  5. 5Inspect vacuum lines and intake manifold for leaks that could affect cylinder performance.
  6. 6Examine the wiring and connectors related to the ignition system for corrosion or damage.

Solution

Solution

1. Preparation

  • Tools Required: OBD-II scanner, socket set, torque wrench, compression tester, multimeter, fuel injector cleaning kit.
  • Ensure the vehicle is parked on a flat surface and the engine is cool.
  • Disconnect the negative terminal of the battery to prevent electrical shorts.

2. Inspect and Replace Spark Plug

  • Remove the engine cover (if applicable).
  • Use a socket wrench to remove the spark plug from cylinder 1.
  • Inspect the spark plug for wear, fouling, or damage.
  • If necessary, replace with a new spark plug, ensuring the correct gap setting (typically 0.8-1.0 mm for most models).
  • Torque the new spark plug to the manufacturer’s specified value (usually around 25 Nm).

3. Check and Replace Ignition Coil

  • Disconnect the electrical connector from the ignition coil at cylinder 1.
  • Remove the ignition coil using a socket wrench.
  • Inspect the ignition coil for cracks or damage.
  • Replace the coil if defective, ensuring it is seated properly before reconnecting the electrical connector.

4. Inspect Fuel Injector

  • Disconnect the fuel injector connector and remove the injector using a fuel injector tool.
  • Check for any obstructions or leaks.
  • Clean the injector using a fuel injector cleaning kit or replace it if necessary.
  • Reinstall the fuel injector and reconnect the connector.

5. Perform Compression Test

  • Remove the spark plug from cylinder 1.
  • Insert the compression tester into the spark plug hole.
  • Crank the engine for several seconds and record the compression reading; it should typically be within the range specified by the manufacturer (usually around 180-200 psi).
  • If the reading is low, further investigation into possible internal engine damage is needed.

6. Reassemble and Reconnect Battery

  • Reinstall the spark plug and ignition coil.
  • Ensure all connections are secure and reattach any engine covers.
  • Reconnect the negative battery terminal.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Compression tester
  • •Multimeter
  • •Fuel injector cleaning kit

Parts Required

  • •Spark plug
  • •Ignition coil (if defective)
  • •Fuel injector (if defective)

Additional Information

Error Code
P0301
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

  1. how to fix P0011 code in Renault Clio V (2019-Present)?

    Learn how to diagnose and fix P0011 VVT issue in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    P0011Engine5 symptoms

  2. how to fix P0171 code in Renault Clio V (2019-Present)

    Learn how to diagnose and fix P0171 engine too lean condition in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    P0171Engine5 symptoms

  3. how to fix P0420 code on Renault Clio V (2019-Present)

    Learn how to diagnose and fix P0420 code related to catalytic converter efficiency in Renault Clio V. Step-by-step guide with tools and procedures.

    P0420Exhaust System6 symptoms

  4. how to clear the engine codes on my Renault Clio V (2019-Present)

    Learn how to clear engine codes on your Renault Clio V (2019-Present) with this step-by-step guide. Ensure your check engine light is off and maintain your vehicle.

    Electrical3 symptoms

  5. how to resolve the P0171 code on my Renault Clio V (2019-Present)

    Learn how to diagnose and fix P0171 engine too lean condition in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    P0171Engine5 symptoms

  6. how to fix the P0420 code on my Renault Clio V (2019-Present)

    Learn how to diagnose and fix P0420 exhaust system issue in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    P0420Exhaust System5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation