FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Renault Clio V (2019-Present) has a rough idle when cold, what could be wrong? - Renault Clio
Home/Cars/Renault/Clio/V (2019-Present)/my Renault Clio V (2019-Present) has a rough idle when cold, what could be wrong?

my Renault Clio V (2019-Present) has a rough idle when cold, what could be wrong?

Renault Clio V (2019-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
551 words

Problem Statement

Learn how to diagnose and fix rough idle issues in Renault Clio V (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Allow the engine to cool before inspecting the throttle body or coolant temperature sensor

Symptoms

  • •Rough idle during cold start
  • •Engine stalling shortly after starting
  • •Increased engine noise or vibration
  • •Poor acceleration until warmed up
  • •Check engine light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Socket set
  • •Torque wrench
  • •Multimeter

Parts Required

  • •Air filter
  • •Spark plugs
  • •Throttle body cleaner
  • •Coolant temperature sensor

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for the repair.
  • Disconnect the battery to prevent electrical issues during inspection.

Tools Required:

  • OBD-II scanner
  • Fuel pressure gauge
  • Socket set
  • Torque wrench
  • Multimeter
2. Replace Air Filter
  • Remove clips or screws securing the air filter cover.
  • Lift the cover and remove the old air filter.
  • Install a new air filter, ensuring it is seated correctly.
3. Inspect and Replace Spark Plugs
  • Remove the engine cover if applicable.
  • Disconnect the ignition coils and unscrew them using a socket.
  • Remove the spark plugs using a spark plug socket.
  • Inspect for wear; replace if necessary with OEM-spec spark plugs and torque them to manufacturer specifications.
4. Clean Throttle Body
  • Disconnect the throttle body connector.
  • Remove the throttle body from the intake manifold (follow torque specifications for reinstallation).
  • Clean the throttle body using throttle body cleaner and a soft cloth.
  • Reinstall the throttle body and reconnect the electrical connector.
5. Replace Coolant Temperature Sensor
  • Locate the coolant temperature sensor on the engine.
  • Disconnect the electrical connector and remove the sensor using a wrench.
  • Install the new sensor and reconnect the electrical connector.
6. Check Fuel Pressure
  • Connect the fuel pressure gauge to the fuel rail.
  • Turn the ignition to the "ON" position without starting the engine and check the pressure reading. It should match the manufacturer's specifications.
  • If the pressure is low, consider replacing the fuel pump or checking the fuel filter.