my Renault Clio V (2019-Present) shakes when braking what could be wrong

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

503 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Renault Clio V (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on brake systems.
•Allow the brake components to cool before touching them after use.

Symptoms

•Steering wheel shakes or vibrates while braking
•Pulsation felt in the brake pedal
•Uneven wear on brake pads or rotors
•Increased stopping distance
•Noise coming from the brake area (squeaking or grinding)

Diagnostic Steps

1
Inspect brake pads for wear and proper installation.
2
Check the brake rotors for warping or uneven surfaces.
3
Verify that the brake calipers are functioning properly and not sticking.
4
Examine suspension components (tie rods, control arms) for wear or damage.
5
Check wheel alignment and balance.
6
Inspect tires for uneven wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Jack and jack stands
•Brake cleaner
•Micrometer

Parts Required

•Brake pads
•Brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and proper installation.
2
Check the brake rotors for warping or uneven surfaces.
3
Verify that the brake calipers are functioning properly and not sticking.
4
Examine suspension components (tie rods, control arms) for wear or damage.
5
Check wheel alignment and balance.
6
Inspect tires for uneven wear or damage.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Wear safety glasses and gloves.

2. Raise the Vehicle

Use a jack to lift the front of the vehicle.
Secure with jack stands to ensure stability.

3. Remove Wheel

Using a socket set, remove the lug nuts and take off the wheel to access the brake components.

4. Inspect and Replace Brake Components

A. Brake Pads

Remove the caliper bolts using a socket wrench.
Carefully slide the caliper off the rotor.
Inspect the brake pads for thickness; replace if worn down to less than 3mm.
If replacing, slide new pads into the caliper bracket.

B. Brake Rotors

Check the rotor surface for warping; use a micrometer to measure thickness.
If warped beyond specification, remove the rotor by unscrewing the retaining screws.
Install new rotors, ensuring they are clean and free of oil.
Torque the rotor screws to manufacturer specifications.

5. Reassemble Components

Reattach the brake caliper and torque bolts to manufacturer specifications.
Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque the lug nuts to the specified value.

6. Test

Start the vehicle and gently test the brakes at low speeds to ensure proper function without shaking or vibration.