why does my Renault Clio V (2019-Present) shake when braking from high speeds?

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

508 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in Renault Clio V (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery when working on electrical components.
•Allow the vehicle to cool down before working on brakes to avoid burns.

Symptoms

•Steering wheel shakes or vibrates during braking
•Vehicle pulls to one side when braking
•Increased stopping distance
•Brake pedal pulsates when pressed
•Uneven wear on brake pads or rotors

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial gauge.
2
Check brake pad condition and thickness for signs of wear or damage.
3
Examine suspension components (e.g., control arms, bushings) for wear or damage.
4
Inspect wheel alignment and tire condition, including imbalance or uneven wear.
5
Perform a brake fluid check for contamination or low levels.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Dial gauge
•Rotor puller (if necessary)
•Brake caliper tool
•Torque wrench
•Basic hand tools for suspension parts
•Alignment machine (if available)
•Hydraulic jack
•Jack stands
•Socket set

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial gauge.
2
Check brake pad condition and thickness for signs of wear or damage.
3
Examine suspension components (e.g., control arms, bushings) for wear or damage.
4
Inspect wheel alignment and tire condition, including imbalance or uneven wear.
5
Perform a brake fluid check for contamination or low levels.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Wear safety gloves and goggles for protection.

2. Raise and Secure the Vehicle

Use a hydraulic jack to lift the vehicle.
Secure it with jack stands to ensure stability.

3. Remove Wheel Assembly

Use a socket set to remove the lug nuts from the affected wheel.
Take off the wheel and set it aside.

4. Inspect and Replace Brake Components

a. Check Brake Rotors

Use a dial gauge to measure rotor thickness and warping.
If warped, replace rotors with new ones.

Tools Required:

Dial gauge
Rotor puller (if necessary)

b. Check Brake Pads

Inspect brake pads for thickness. Replace if below manufacturer specifications (typically 3mm).
Ensure proper seating of new pads.

Tools Required:

Brake caliper tool
Torque wrench

5. Inspect Suspension and Alignment

Visually inspect suspension components for visible wear or damage.
If components show wear, replace with OEM parts.
After replacing, perform a wheel alignment to ensure proper handling.

Tools Required:

Basic hand tools for suspension parts
Alignment machine (if available)

6. Reassemble and Lower Vehicle

Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle from the jack stands and fully tighten the lug nuts to the manufacturer’s torque specifications.