why does my Renault Clio V (2019-Present) shake when I brake?

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

568 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix braking vibrations in Renault Clio V (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the braking system.
•Allow the vehicle to cool before working on brake components to avoid burns.

Symptoms

•Vibration or shaking felt in the steering wheel during braking
•Pulsating brake pedal feedback
•Uneven brake wear or scoring on brake rotors
•Increased stopping distance
•Noise (squeaking or grinding) during braking

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial indicator.
2
Check brake pads for wear and ensure they are within service limits.
3
Examine suspension components (control arms, bushings, ball joints) for wear or damage.
4
Verify wheel alignment and balance, checking for any visible damage to wheels.
5
Scan the vehicle’s onboard diagnostics for any related error codes.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Dial indicator
•Jack and jack stands
•Wire brush

Parts Required

•New brake rotors
•New brake pads

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial indicator.
2
Check brake pads for wear and ensure they are within service limits.
3
Examine suspension components (control arms, bushings, ball joints) for wear or damage.
4
Verify wheel alignment and balance, checking for any visible damage to wheels.
5
Scan the vehicle’s onboard diagnostics for any related error codes.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Ensure that the engine is off and allow the vehicle to cool.

2. Remove Wheel Assembly

Loosen the wheel lug nuts using a socket set.
Raise the vehicle with a jack and secure it with jack stands.
Completely remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Rotors

Inspect: Check the brake rotor for warping or scoring using a dial indicator.
Replace:
- If the rotor is warped, remove the caliper by unscrewing the caliper bracket bolts.
- Remove the rotor by sliding it off the hub.
- Clean the hub surface with a wire brush to ensure proper seating of the new rotor.
- Install the new rotor, ensuring it is seated correctly.

4. Inspect and Replace Brake Pads

Remove the brake pads from the caliper bracket by sliding them out.
Inspect the pads for uneven wear or thickness.
If worn, replace with new pads, ensuring they match the rotor size and specifications.

5. Reassemble Components

Reinstall the caliper over the new pads and rotor, tightening the caliper bracket bolts to the manufacturer's torque specifications (typically around 25-35 Nm).
Reattach the wheel and hand-tighten the lug nuts.
Lower the vehicle back to the ground and use a torque wrench to tighten the lug nuts to the proper torque (usually around 90-110 Nm).

6. Test Brake Function

Start the vehicle and test the brake pedal before driving.
Conduct a short test drive to ensure smooth braking and no vibrations.