why does my Renault Clio V engine rev but car won't move

Solution

1. Preparation

• Gather necessary tools and safety equipment.
• Ensure the vehicle is parked on a level surface and the engine is turned off before beginning work.

2. Check and Refill Transmission Fluid

• Tools Required: Transmission fluid pump, funnel, fluid catch pan.
• Sub-steps:
  1. Remove the transmission dipstick or fill plug.
  2. Inspect the fluid condition; it should be bright red and not burnt or cloudy.
  3. If low, use a funnel to add the correct type of transmission fluid (refer to owner’s manual for specifications).
  4. Reinsert the dipstick or fill plug securely.

3. Inspect Transmission Linkage

• Tools Required: Socket set, screwdriver.
• Sub-steps:
  1. Locate the transmission linkage and visually inspect for any disconnections or damage.
  2. Use a socket set to tighten any loose connections.
  3. If damaged, replace the linkage with a new part.

4. Test Transmission Engagement

• Tools Required: None.
• Sub-steps:
  1. With the engine running, shift through all gears (P, R, N, D) while observing for response.
  2. If the vehicle does not engage in any gear, further inspection of the transmission may be required.

5. Inspect Driveshaft and CV Joints

• Tools Required: Jack, jack stands, socket set.
• Sub-steps:
  1. Safely lift the vehicle using a jack and secure it with jack stands.
  2. Inspect the driveshaft for any signs of wear or damage.
  3. Check the CV joints for any torn boots or excessive play; replace if necessary.