why is my Renault Clio V (2019-Present) air conditioning not blowing cold?

Solution

1. Preparation

• Gather necessary tools and parts.
• Ensure the vehicle is parked on a level surface and the engine is off.
• Disconnect the battery to prevent any electrical issues.

2. Recharge Refrigerant

• Tools Required: A/C refrigerant kit, manifold gauge set.
• Instructions:
  1. Connect the manifold gauge set to the low and high-pressure service ports of the A/C system.
  2. Start the engine and turn the A/C to maximum settings.
  3. Check the pressure readings; if low, proceed to recharge.
  4. Follow the manufacturer’s specifications to add the correct type and amount of refrigerant.
  5. Monitor the pressure to ensure it stabilizes within the normal range.

3. Replace A/C Compressor Clutch (if necessary)

• Tools Required: Socket set, wrenches, A/C compressor clutch replacement kit.
• Instructions:
  1. Remove the drive belt from the A/C compressor.
  2. Detach the electrical connector from the A/C compressor clutch.
  3. Remove the retaining screws or clips securing the clutch to the compressor.
  4. Install the new clutch by reversing the removal steps.
  5. Reattach the drive belt and reconnect the electrical connector.

4. Check and Replace Cabin Air Filter

• Tools Required: Screwdriver or trim removal tool.
• Instructions:
  1. Locate the cabin air filter housing, usually behind the glove compartment.
  2. Remove any screws or clips holding the housing cover.
  3. Take out the old cabin air filter and inspect for dirt and debris.
  4. Install a new cabin air filter according to the manufacturer’s specifications.
  5. Reassemble the housing cover and secure it with screws or clips.