why is my Renault Clio V (2019-Present) making a popping noise when turning

Solution

1. Preparation

• Gather necessary tools and parts.
• Ensure the vehicle is parked on a flat surface and the engine is off.
• Tools Required: Jack and jack stands, socket set, torque wrench, stethoscope.

2. Inspect and Replace Worn Components

• Step 1: Lift the vehicle using a jack and secure it with jack stands.
• Step 2: Remove the front wheels using the socket set.
• Step 3: Inspect the following components for wear or damage:
  • CV joints and boots: Look for tears or leaks.
  • Control arms and bushings: Check for cracks or excessive wear.
  • Strut mounts and bearings: Inspect for noise and visible damage.
• Step 4: If any components are worn or damaged, replace them with OEM or quality aftermarket parts.
  • For CV joints, ensure to replace the boot and grease with the appropriate type.
• Step 5: Reassemble by placing the wheels back on and tightening lug nuts to the manufacturer's torque specification.

3. Test Drive

• Step 1: Lower the vehicle back to the ground and remove the jack stands.
• Step 2: Start the engine and perform a test drive to check for the absence of popping noise when turning.