my Skoda Octavia smells like burning rubber what does this mean

Solution

1. Preparation

• Ensure the vehicle is parked on a level surface and the engine is turned off.
• Gather all necessary tools and safety equipment.

2. Inspect and Replace Worn Belts

• Sub-steps:
  1. Open the hood and visually inspect all drive belts for wear, cracks, or fraying.
  2. If a belt is damaged, loosen the tensioner using a socket wrench.
  3. Remove the damaged belt by sliding it off the pulleys.
  4. Install a new belt by routing it according to the belt routing diagram under the hood.
  5. Tighten the tensioner to the manufacturer’s specifications.

3. Check and Replace Tires

• Sub-steps:
  1. Inspect each tire for signs of uneven wear, bulges, or foreign objects.
  2. If damage is found, replace the affected tire(s) by loosening the lug nuts using a socket set.
  3. Lift the vehicle with a jack and remove the wheel.
  4. Mount the new tire and tighten the lug nuts to the manufacturer’s torque specifications.

4. Inspect and Service Brakes

• Sub-steps:
  1. Remove the wheel to access the brake components.
  2. Check the brake pads for wear; replace them if they are below the minimum thickness.
  3. Inspect the brake rotor for overheating signs; replace if necessary.
  4. Reassemble the wheel and lower the vehicle.

5. Address Fluid Leaks

• Sub-steps:
  1. Clean any visible oil or fluid leaks in the engine bay.
  2. Identify the source of the leak (e.g., oil pan, coolant hose).
  3. Replace any damaged gaskets, hoses, or seals to stop the leak.
  4. Refill any lost fluids to the appropriate levels.

Tools Required:

• Socket set
• Torque wrench
• Jack and jack stands
• OBD-II scanner
• Brake pad gauge
• Belt tensioner tool

Parts Required:

• Replacement drive belts
• New tires (if necessary)
• Brake pads and rotors (if worn)
• Gaskets or seals for fluid leaks

Estimated Repair Time: 2-4 hours

Safety Warnings:

• Disconnect the battery before working on electrical components.
• Allow the engine to cool before inspecting or servicing components.