what does C0037 code mean for Skoda Octavia NFL (2020-Present)

Learn how to diagnose and fix C0037 wheel speed sensor issue in Skoda Octavia NFL. Step-by-step guide with diagnostic procedures and repair instructions.

Solution

1. Preparation

• Gather tools and park the vehicle on a level surface.
• Ensure the vehicle is in gear or park mode and the parking brake is engaged.

2. Disconnect Battery

• Use a socket set to disconnect the negative terminal of the battery to prevent electrical shorts.

3. Remove Wheel

• Tools Required: Socket set, jack, jack stands
• Raise the rear of the vehicle using a jack and secure it with jack stands.
• Remove the rear left wheel using a socket set.

4. Access Wheel Speed Sensor

• Locate the wheel speed sensor on the rear left hub assembly.
• Disconnect the sensor’s electrical connector by pressing the tab and pulling it apart.

5. Inspect and Replace Wheel Speed Sensor

• Tools Required: Torque wrench, cleaning brush
• Remove the wheel speed sensor from its mounting location.
• Clean the area around the sensor's mounting hole.
• Inspect the sensor for any visible damage. If damaged, replace it with a new sensor.
• Install the new wheel speed sensor and torque it to the manufacturer's specifications.

6. Reconnect Electrical Connector

• Reconnect the electrical connector ensuring it clicks into place securely.

7. Reinstall Wheel and Battery Terminal

• Reattach the rear left wheel and torque the lug nuts to the specified value.
• Reconnect the negative battery terminal.

8. Test Drive

• Start the vehicle and perform a test drive to ensure the issue is resolved.