why does my Skoda Octavia shake when I brake

Solution

1. Preparation

• Gather necessary tools and parts.
• Park the vehicle on a level surface and engage the parking brake.
• Disconnect the battery to prevent any electrical issues during repairs.

2. Brake Rotor Inspection and Replacement

• Inspect Rotors:

  • Remove the wheel using a socket set.
  • Using a dial gauge, check rotor runout; replace if warping exceeds specifications.

• Replace Rotors (if necessary):

  • Remove caliper bolts using a wrench and detach the caliper from the rotor.
  • Support the caliper with a bungee cord or rope to avoid hanging by the brake line.
  • Remove the rotor by unscrewing any retaining screws and pulling it off the hub.
  • Install new rotors, ensuring they are properly seated.

3. Brake Pad Inspection and Replacement

• Check Brake Pads:

  • Inspect brake pads for thickness; replace if below manufacturer's minimum specification.

• Replace Pads (if necessary):

  • Remove the caliper bracket using a socket set.
  • Slide out the old pads and replace them with new pads, ensuring proper orientation.
  • Reinstall the caliper bracket and secure it with the original bolts.

4. Suspension Component Check

• Inspect control arms, bushings, and other suspension parts for wear or damage.
• Replace any worn components as necessary, following manufacturer specifications for torque values during reinstallation.

5. Wheel Alignment and Balancing

• After reassembling the braking system, perform a wheel alignment and balance procedure to ensure correct handling and tire wear.