why does my Skoda Octavia shake when I brake?

Solution

1. Preparation

• Gather necessary tools and parts.
• Ensure the vehicle is parked on a level surface and the parking brake is engaged.

2. Remove Wheel

• Loosen lug nuts using a socket wrench.
• Jack up the vehicle and secure it with jack stands.
• Remove the wheel to access the brake components.

3. Inspect and Replace Brake Components

A. Inspect Brake Rotors

• Check for warping using a dial gauge or by visual inspection.
• If warped, replace rotors with new ones.
  • Tools Required: Dial gauge, impact wrench for rotor removal
  • Note: Use a torque wrench to tighten to manufacturer specifications.

B. Inspect Brake Pads

• Remove caliper bolts and slide the caliper off the rotor.
• Check brake pads for thickness; replace if worn below specifications.
  • Tools Required: Socket set, brake pad spreader
  • Note: Ensure to lubricate contact points on the caliper.

4. Reassemble Components

• Reinstall the caliper and ensure it is securely fastened.
• Reattach the wheel and hand-tighten lug nuts.
• Lower the vehicle and torque the lug nuts to the specified value.

5. Final Checks

• Pump the brake pedal to ensure proper caliper seating.
• Perform a test drive to confirm the shaking issue is resolved.