why does my Skoda Octavia smell like burning oil

Solution

1. Preparation

• Gather tools and materials: socket set, torque wrench, oil catch pan, rags, engine oil, new gasket/oil filter if needed.
• Ensure the vehicle is parked on a level surface and the engine is cool.

2. Engine Oil Level Check

• Pull the dipstick out and wipe it clean.
• Reinsert the dipstick and remove it again to check the oil level.
• If low, add the appropriate type of engine oil as per manufacturer specifications.

3. Inspect and Replace Gaskets/Seals

• Valve Cover Gasket Replacement:
  1. Remove any engine covers obstructing access to the valve cover.
  2. Disconnect any electrical connectors or hoses attached to the valve cover.
  3. Remove the bolts securing the valve cover using a socket set.
  4. Carefully lift the valve cover off and inspect the old gasket for damage.
  5. Clean the mating surfaces on both the valve cover and cylinder head.
  6. Install the new gasket onto the valve cover and reattach it.
  7. Torque the valve cover bolts to the manufacturer’s specified torque value.

4. Inspect and Replace Oil Filter

• Locate the oil filter and inspect it for leaks.
• If necessary, use an oil filter wrench to remove the old filter.
• Apply a small amount of new engine oil to the gasket of the new filter before installation.
• Install the new filter and tighten it by hand until snug.

5. Check for Oil Leaks

• Start the engine and let it idle.
• Inspect the engine bay and under the vehicle for any signs of leaks.
• Allow the engine to run for a few minutes and monitor for smoke or additional smells.