why does my Skoda Octavia smell like burning rubber

Solution

1. Preparation

• Gather tools and parts required for the repair.
• Ensure the vehicle is parked on a level surface and the engine is cool.
• Disconnect the battery to prevent any electrical short circuits.

2. Inspect and Replace Worn Belts

• Inspect the serpentine and timing belts for signs of cracks, fraying, or glazing.
• If any damage is found, remove the old belt by loosening the tensioner and carefully sliding the belt off the pulleys.
• Install the new belt, ensuring it is properly aligned with all pulleys. Use the appropriate tensioner settings as specified in the vehicle’s service manual.

3. Check and Replace Brake Components

• Inspect brake pads and rotors for excessive wear. If the pads are worn down, remove the wheel and inspect the brake assembly.
• Replace worn brake pads and resurface or replace rotors if necessary. Ensure to apply brake grease to the contact points.
• Reassemble the wheel and lower the vehicle.

4. Inspect and Replace Damaged Hoses

• Check hoses for any signs of cracks or leaks. Pay special attention to the rubber hoses connected to the cooling system.
• If damaged, remove the old hose by loosening the clamps and carefully detaching it.
• Install the new hose, ensuring it is secured with clamps and does not interfere with moving parts.

5. Monitor and Test

• Reconnect the battery and start the engine.
• Allow the engine to warm up while monitoring for any unusual smells or sounds.
• Take the vehicle for a test drive to ensure the burning smell has dissipated and check that all systems are functioning correctly.