why does my Tesla Forester shake when I brake at high speeds

Subaru Forester 6th Generation (2024-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

547 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Subaru Forester during high-speed braking. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted before working underneath.
•Always wear safety glasses and gloves when handling brake components.

Symptoms

•Steering wheel shakes or vibrates when braking
•Vehicle pulls to one side during braking
•Brake pedal pulsates or feels uneven
•Increased stopping distance
•Possible noise from the brakes (squeaking, grinding)

Diagnostic Steps

1
Inspect brake components visually for wear or damage, including pads and rotors.
2
Check rotor thickness with a caliper to ensure they are within specifications.
3
Use a wheel balancer to verify that all wheels are balanced correctly.
4
Perform a test drive to confirm the presence and conditions of the shaking.
5
Inspect suspension components (control arms, ball joints, bushings) for wear or damage.
6
Check alignment settings to ensure proper vehicle handling.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•Torque wrench
•Caliper tool (if compressing pistons)

Parts Required

•Brake pads
•Brake rotors
•Any worn suspension components (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake components visually for wear or damage, including pads and rotors.
2
Check rotor thickness with a caliper to ensure they are within specifications.
3
Use a wheel balancer to verify that all wheels are balanced correctly.
4
Perform a test drive to confirm the presence and conditions of the shaking.
5
Inspect suspension components (control arms, ball joints, bushings) for wear or damage.
6
Check alignment settings to ensure proper vehicle handling.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a flat surface and secure it with wheel chocks.
Disconnect the battery if electrical components are involved.

2. Inspect and Replace Brake Pads and Rotors

Lift the Vehicle:
- Use a jack to lift the front or rear (depending on which brakes are being serviced) and secure it with jack stands.
Remove Wheels:
- Use a lug wrench to remove the lug nuts and take off the wheels.
Remove Brake Caliper:
- Use a socket set to remove bolts securing the brake caliper.
- Support the caliper with a bungee cord or similar to avoid straining the brake line.
Inspect and Replace Brake Pads:
- Remove old brake pads from the caliper bracket.
- Compare new pads with old for wear.
- Install new brake pads into the caliper bracket.
Inspect and Replace Brake Rotors:
- Remove the old rotor by unscrewing any retaining screws or clips.
- Clean the hub surface to ensure the new rotor sits flat.
- Install the new rotor, ensuring it is secure.
Reassemble Caliper and Wheel:
- Reattach the caliper over the new pads and tighten bolts to manufacturer torque specifications.
- Reinstall the wheel and tighten lug nuts in a crisscross pattern to ensure even pressure.

3. Check Suspension and Alignment

Inspect Suspension Components:
- Visually check for any worn or damaged parts in the suspension system.
- Replace any parts that show signs of wear.
Perform Wheel Alignment:
- Use an alignment machine to adjust the alignment according to manufacturer specifications.