FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Subaru/Outback/4th Generation (2010-2014)/how to deal with the P0442 code in Tesla Outback 4th Generation (2010-2014)

how to deal with the P0442 code in Tesla Outback 4th Generation (2010-2014)

Subaru Outback 4th Generation (2010-2014)

Error Codes
Severity: mediumDifficulty: mediumError Code: P04422-4 hours
3 min read
538 words

Problem Statement

Learn how to diagnose and fix P0442 code related to EVAP leaks in Subaru Outback (2010-2014). Step-by-step guide with symptoms and solutions.

Error Code
P0442
Affected Component
Fuel System
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before working on the fuel system.

Symptoms

  • •Check engine light illuminated
  • •Reduced fuel efficiency
  • •Gasoline odor in the cabin or around the vehicle
  • •Difficulty refueling due to vapor lock
  • •Hissing or popping noise from the fuel tank area

Diagnostic Steps

  1. 1Scan the vehicle using an OBD-II scanner to confirm the P0442 code and check for any additional codes.
  2. 2Inspect the gas cap for cracks, damage, or improper sealing; replace if necessary.
  3. 3Visually examine all EVAP hoses and connections for signs of wear, cracks, or disconnections.
  4. 4Perform a smoke test on the EVAP system to detect leaks in the components.
  5. 5Check the EVAP canister for damage or blockages.
  6. 6Verify the operation of the purge valve and vent valve for proper function.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to prevent electrical shorts.
  • Allow the engine to cool completely if it has been running.

2. Inspect and Replace the Gas Cap

  • Inspect the gas cap for damage and ensure it seals properly.
  • If damaged, replace it with a manufacturer-approved gas cap.
  • Reconnect the battery terminal after the replacement.

3. Inspect EVAP Hoses and Connections

  • Remove any protective covers to access the EVAP hoses.
  • Check each hose for cracks, loose connections, or signs of wear.
  • Replace any damaged hoses with OEM parts.
  • Ensure all connections are tight and secure.

4. Perform a Smoke Test

  • Connect the smoke machine to the EVAP system through the service port.
  • Activate the smoke machine and observe for smoke escaping from any leaks.
  • Repair any detected leaks by replacing faulty components.

5. Check and Replace Purge and Vent Valves

  • Locate the purge valve and vent valve, typically found near the EVAP canister.
  • Use a multimeter to test the electrical connections and operation of each valve.
  • Replace any malfunctioning valves with OEM parts.

6. Clear the Codes

  • Use the OBD-II scanner to clear the P0442 code from the ECU.
  • Reconnect the battery terminal.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Smoke machine
  • •Socket set

Parts Required

  • •OEM gas cap (if needed)
  • •Replacement EVAP hoses (if needed)
  • •Purge valve (if needed)
  • •Vent valve (if needed)

Additional Information

Error Code
P0442
Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
4 items

Related Faults

  1. how to improve fuel economy on Tesla Outback 4th Generation (2010-2014)?

    Learn how to improve fuel economy for your 2010-2014 Subaru Outback. Step-by-step guide with diagnostic steps, tools, and maintenance tips.

    Fuel System5 symptoms

  2. how to fix P0011 timing code in Tesla Outback 4th Generation (2010-2014)

    Learn how to diagnose and fix P0011 VVT issue in Subaru Outback 2010-2014. Step-by-step guide with diagnostic procedures and repair instructions.

    P0011Engine5 symptoms

  3. how to change spark plugs in Tesla Outback 4th Generation (2010-2014)

    Step-by-step guide on how to change spark plugs in a 2010-2014 Subaru Outback. Includes symptoms, diagnostic steps, tools, and safety warnings.

    Engine5 symptoms

  4. how to check for CVT issues in Tesla Outback 4th Generation (2010-2014)

    Learn how to diagnose and fix CVT issues in 2010-2014 Subaru Outback. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission6 symptoms

  5. how to fix P0700 code in Tesla Outback 4th Generation (2010-2014)

    Learn how to diagnose and fix P0700 transmission control malfunction in Subaru Outback (2010-2014). Step-by-step guide with diagnostic procedures and repair instructions.

    P0700Transmission6 symptoms

  6. how to perform a throttle body cleaning on Tesla Outback 4th Generation (2010-2014)

    Learn how to clean the throttle body on a 2010-2014 Subaru Outback. Step-by-step instructions to resolve rough idling and poor acceleration issues.

    Engine5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation