how to fix the rearview camera not working on Tesla Outback 4th Generation (2010-2014)

Subaru Outback 4th Generation (2010-2014)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

514 words

Problem Statement

Learn how to diagnose and fix the rearview camera not working issue in 2010-2014 Subaru Outback. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid shocks or short circuits.

Symptoms

•Rearview camera display remains black or shows no image
•Check Rear Camera warning message displayed on the screen
•Camera image flickers intermittently
•No response from camera when shifting into reverse
•Backup sensors may still function correctly

Diagnostic Steps

1
Inspect the camera lens for dirt, damage, or obstructions.
2
Check the vehicle’s fuse box for any blown fuses related to the rearview camera system.
3
Use an OBD-II scanner to check for any stored error codes related to the rearview camera.
4
Visually inspect wiring and connectors leading to the rearview camera for damage or corrosion.
5
Test the camera using a multimeter to verify power supply and ground connections.
6
Inspect the display unit for any signs of malfunction or software issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdriver set
•Fuse puller
•Electrical tape
•Soft cleaning cloth

Parts Required

•Replacement fuse (if blown)
•Replacement rearview camera (if necessary)
•Replacement wiring/connectors (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the camera lens for dirt, damage, or obstructions.
2
Check the vehicle’s fuse box for any blown fuses related to the rearview camera system.
3
Use an OBD-II scanner to check for any stored error codes related to the rearview camera.
4
Visually inspect wiring and connectors leading to the rearview camera for damage or corrosion.
5
Test the camera using a multimeter to verify power supply and ground connections.
6
Inspect the display unit for any signs of malfunction or software issues.

Solution

1. Preparation

Gather the necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the negative terminal of the battery to prevent electrical shock.

2. Inspect and Clean the Camera

Remove any obstructions from the camera lens.
Clean the camera lens using a soft cloth and appropriate cleaner if dirty.

3. Check and Replace Fuses

Locate the fuse box (typically under the dashboard or in the engine compartment).
Identify the fuse for the rearview camera using the fuse diagram.
Remove the fuse using a fuse puller or pliers.
Inspect the fuse for continuity; if blown, replace it with a new fuse of the same amperage.

4. Repair or Replace Wiring/Connectors

Trace the wiring harness from the rearview camera to the display unit.
Look for visible signs of wear, fraying, or corrosion.
Repair any damaged wiring with electrical tape or splice in new wire as needed.
Replace any corroded connectors with new connectors.

5. Test the Rearview Camera

Reconnect the negative terminal of the battery.
Shift the vehicle into reverse and check if the rearview camera functions properly.
If the issue persists, consider replacing the camera unit.