FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the service light on my Tesla Outback 4th Generation (2010-2014) - Subaru Outback
Home/Cars/Subaru/Outback/4th Generation (2010-2014)/how to reset the service light on my Tesla Outback 4th Generation (2010-2014)

how to reset the service light on my Tesla Outback 4th Generation (2010-2014)

Subaru Outback 4th Generation (2010-2014)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
362 words

Problem Statement

Learn how to reset the service light on your 2010-2014 Subaru Outback. Step-by-step instructions for a quick and easy reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' and on a flat surface before performing the reset.

Symptoms

  • •Service light illuminated on the dashboard
  • •Maintenance reminder displayed on the instrument cluster
  • •Vehicle may require regular service or oil change soon

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required for this procedure.

Parts Required

  • •None required for the reset.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather the necessary tools (if required).
  • Ensure the vehicle is parked on a level surface.
  • Have the vehicle in the "ON" position without starting the engine.
2. Reset the Service Light

  1. Locate the Odometer Button

    • Identify the odometer/trip meter button on the instrument cluster.

  2. Press and Hold the Button

    • Press and hold the odometer/trip meter button down.

  3. Turn the Ignition ON

    • While holding the button, turn the ignition switch to the "ON" position (do not start the engine).

  4. Hold Until Light Blinks

    • Keep holding the button until the service light on the dashboard begins to blink, then release the button.

  5. Confirm Reset

    • Turn the ignition off and then back on to confirm that the service light has been reset.