how to reset the service light on Tesla Outback 4th Generation (2010-2014)

Subaru Outback 4th Generation (2010-2014)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

348 words

Problem Statement

Learn how to reset the service light on a 2010-2014 Tesla Outback. Step-by-step guide with diagnostic procedures and reset instructions.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stationary position before starting the reset process.

Symptoms

•Service light illuminated on the dashboard
•Maintenance reminder displayed
•Engine oil change alert may be present
•Tire rotation alert may be present

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Navigate to the vehicle settings on the dashboard display.
3
Locate the 'Service' or 'Maintenance' menu option.
4
Select the option to reset the service light or maintenance reminder.
5
Confirm the reset action when prompted.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob
•Ignition key

Parts Required

•None needed for reset

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the ignition is off.
Gather necessary tools: key fob or ignition key, and access to the vehicle’s dashboard display.

2. Turn On Ignition

Insert the key fob or key into the ignition.
Turn the ignition to the "ON" position (do not start the engine).

3. Access the Vehicle Settings

Use the dashboard interface to navigate to the "Settings" or "Menu".
Scroll to find the "Service" or "Maintenance" section.

4. Reset Service Light

Select “Reset Service Light” or similar option.
Confirm the action by selecting “Yes” or “OK” when prompted.

5. Verify Reset

Turn off the ignition and then turn it back on again.
Check to see if the service light is no longer illuminated on the dashboard.