how to resolve P0750 code in Tesla Outback 4th Generation (2010-2014)

Solution

1. Preparation

• Gather necessary tools and parts.
• Ensure the vehicle is parked on a level surface and the engine is off.
• Disconnect the negative terminal of the battery to prevent electrical shock.

2. Inspect and Replace Shift Solenoid

1. Remove the transmission fluid pan:

   • Use a socket set to remove the bolts securing the pan.
   • Carefully lower the pan and drain the fluid into a suitable container.
   • Clean the pan and replace the gasket if necessary.

2. Access the shift solenoid:

   • Locate the shift solenoid "A" based on the vehicle service manual.
   • Disconnect the electrical connector from the solenoid.
   • Remove the mounting bolts holding the solenoid in place.

3. Replace the solenoid:

   • Install the new shift solenoid "A" and tighten the bolts to the manufacturer's specified torque (typically around 10-12 ft-lbs).
   • Reconnect the electrical connector ensuring a secure connection.

3. Reassemble and Refill Fluid

• Reinstall the transmission pan and secure it with bolts.
• Refill the transmission with the correct type and amount of fluid (consult the owner’s manual for specifications).
• Reconnect the negative battery terminal.