what does it mean if my Tesla Outback has a P0302 code

Solution

1. Preparation

• Gather tools and parts needed for the repair.
• Disconnect the negative battery terminal to prevent electrical shorts.
• Gather a socket set, torque wrench, and OBD-II scanner.

2. Inspect and Replace Spark Plug

1. Remove the engine cover if necessary.
2. Locate the spark plug for cylinder 2.
3. Use a spark plug socket to remove the spark plug.
4. Inspect the spark plug for signs of fouling or damage; replace if necessary.
5. Install a new spark plug, ensuring it is torqued to the manufacturer's specification (usually around 13-15 lb-ft).

3. Check and Replace Ignition Coil

1. Remove the ignition coil from cylinder 2.
2. Inspect the ignition coil for cracks or other physical damage.
3. If necessary, replace the ignition coil with a new unit, ensuring it is seated properly.

4. Inspect Fuel Injector

1. Disconnect the electrical connector from the fuel injector for cylinder 2.
2. Remove the fuel injector carefully using an appropriate tool.
3. Inspect the fuel injector for clogs or damage; clean or replace as needed.
4. Reinstall the fuel injector, ensuring proper sealing and connections.

5. Verify Compression

1. Perform a compression test on cylinder 2 using a compression gauge.
2. Compare the results to the specifications outlined in the service manual.
3. If compression is low, further investigation may be required for internal engine issues.