how to check transmission fluid level in Tesla Outback 5th Generation (2015-2019)

Solution

1. Preparation

• Gather necessary tools: funnel and transmission fluid (specific to the Tesla Outback).
• Park the vehicle on a level surface to ensure an accurate reading.
• Ensure the engine is turned off and the vehicle is in park.

2. Check Fluid Level

• Step 1: With the dipstick removed, wipe it clean using a lint-free cloth.
• Step 2: Reinsert the dipstick fully into the tube and remove it again to check the fluid level.
• Step 3: Observe the fluid level against the dipstick markings to determine if it is within the acceptable range.

3. Adding Transmission Fluid (if needed)

• Step 1: If the fluid is low, use a funnel to add the correct type of transmission fluid.
• Step 2: Add fluid gradually, checking the level frequently to avoid overfilling.
• Step 3: Recheck the fluid level after adding fluid to ensure it is at the correct level.