how to fix P0700 code in Tesla Outback 5th Generation (2015-2019)

Solution

1. Preparation

• Gather all necessary tools and parts before starting.
• Disconnect the vehicle's battery to ensure safety while working on electrical components.

2. Inspect Transmission Fluid

1. Locate the transmission dipstick and remove it.
2. Wipe it clean and reinsert it to check the fluid level.
3. If low, add the manufacturer-recommended transmission fluid.
4. If the fluid is dark or smells burnt, prepare for a fluid change.

3. Check Wiring and Connectors

1. Visually inspect the wiring harness connected to the TCM for any signs of wear, corrosion, or loose connections.
2. Use a multimeter to test for continuity in the wiring.
3. Repair or replace any damaged wiring or connectors as necessary.

4. Replace Transmission Fluid and Filter (if necessary)

1. Locate the transmission pan and remove the bolts using a socket set.
2. Carefully lower the pan to avoid spilling fluid; replace the filter if applicable.
3. Clean the pan and replace the gasket.
4. Reinstall the pan and torque bolts to manufacturer's specifications (usually around 10-12 lb-ft).
5. Refill the transmission with the correct fluid type.

5. Reprogram TCM (if applicable)

1. Using a diagnostic tool, access the transmission control module settings.
2. Follow the manufacturer's procedure for reprogramming or resetting the TCM.
3. Ensure all settings are confirmed and saved.