how to fix the P0130 code in my Tesla Outback 5th Generation (2015-2019)

Learn how to diagnose and fix P0130 oxygen sensor circuit issues in a 2015-2019 Subaru Outback. Step-by-step guide with diagnostic procedures and repair instructions.

Solution

1. Preparation

• Gather all necessary tools and parts.
• Disconnect the negative battery terminal to prevent electrical shorts.

2. Remove the Oxygen Sensor

• Locate the Bank 1 Sensor 1 oxygen sensor, typically positioned before the catalytic converter.
• Use an oxygen sensor socket to unscrew the sensor from the exhaust pipe.
• Carefully disconnect the electrical connector from the sensor.

3. Inspect and Clean

• Inspect the sensor threads for carbon buildup; clean if necessary using a wire brush.
• Check the connector for corrosion or damage; clean with electrical contact cleaner if required.

4. Install New Oxygen Sensor

• Apply anti-seize compound to the threads of the new oxygen sensor (avoid getting it on the sensor tip).
• Screw the new sensor into place and tighten it to manufacturer specifications (usually around 30 ft-lbs).
• Reconnect the electrical connector firmly.

5. Reconnect Battery and Test

• Reconnect the negative battery terminal.
• Start the engine and allow it to idle for a few minutes.
• Use the OBD-II scanner to clear the code and check for reoccurrence.