how to replace the windshield wipers on my Tesla Outback 5th Generation (2015-2019)

Subaru Outback 5th Generation (2015-2019)

Error Codes

30-60 minutes

Time

easy

Difficulty

medium

Severity

3 min read

486 words

Problem Statement

Step-by-step guide to replace windshield wipers on Tesla Outback 5th Generation (2015-2019). Learn symptoms, diagnostic steps, and installation tips.

Affected Component

Body/Interior

Estimated Time

30-60 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the wipers are off before attempting to replace them to avoid injury.

Symptoms

•Streaking or smearing on the windshield
•Wipers skipping or not making full contact with the glass
•Noisy operation when wipers are in use
•Wipers not moving at all or moving erratically
•Visible tears or damage to the wiper blades

Diagnostic Steps

1
Inspect the wiper blades for physical damage or wear.
2
Test the wiper operation at various speed settings.
3
Check the wiper arm tension to ensure proper contact with the windshield.
4
Verify that the wiper motor is functioning by listening for sound during operation.
5
Check the condition of the windshield itself for any obstructions or damage.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver
•Clean cloth

Parts Required

•New windshield wiper blades (specific to Tesla Outback 5th Generation)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the wiper blades for physical damage or wear.
2
Test the wiper operation at various speed settings.
3
Check the wiper arm tension to ensure proper contact with the windshield.
4
Verify that the wiper motor is functioning by listening for sound during operation.
5
Check the condition of the windshield itself for any obstructions or damage.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and turn off the ignition.
Lift the windshield wiper arms away from the glass for easier access.

2. Remove Old Wiper Blades

Locate the release mechanism: Identify the small tab or lever on the wiper blade connection.
Release the wiper blade: Press the tab or pull the lever while sliding the wiper blade downwards to detach it from the wiper arm.
Repeat for the other blade: Follow the same procedure to remove the second wiper blade.

3. Install New Wiper Blades

Align the new blade: Take the new wiper blade and align it with the wiper arm's hook.
Attach the new blade: Slide the wiper blade onto the wiper arm until you hear a click or feel it lock into place.
Repeat for the other blade: Ensure both new blades are securely attached.

4. Test Wiper Functionality

Lower the wiper arms: Carefully lower the wiper arms back onto the windshield.
Turn on the ignition: Start the vehicle and activate the wipers to ensure they operate smoothly.
Check for proper contact: Inspect if the blades clean the windshield effectively without streaking or skipping.