how to reset the check engine light in Tesla Outback 5th Generation (2015-2019)

Subaru Outback 5th Generation (2015-2019)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

409 words

Problem Statement

Learn how to reset the check engine light on a 2015-2019 Subaru Outback. Step-by-step guide with diagnostic procedures and tools required.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is turned off and parked safely before working on electrical systems.

Symptoms

•Check engine light illuminated
•Vehicle running normally without noticeable issues
•No other warning lights present on the dashboard
•Recent maintenance or repairs performed
•Possible temporary fault codes present

Diagnostic Steps

1
Verify that the vehicle has no ongoing issues by checking for any noticeable symptoms during operation.
2
Use an OBD-II scanner to check for any stored trouble codes.
3
Clear the trouble codes using the OBD-II scanner.
4
Disconnect the vehicle's battery for 10-15 minutes as an additional reset method.
5
Reconnect the battery and check if the check engine light remains off.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Safety gloves

Parts Required

•None required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that the vehicle has no ongoing issues by checking for any noticeable symptoms during operation.
2
Use an OBD-II scanner to check for any stored trouble codes.
3
Clear the trouble codes using the OBD-II scanner.
4
Disconnect the vehicle's battery for 10-15 minutes as an additional reset method.
5
Reconnect the battery and check if the check engine light remains off.

Solution

1. Preparation

Gather tools: OBD-II scanner, socket set, safety gloves.
Ensure the vehicle is parked on a flat surface and the engine is off.

2. Use OBD-II Scanner

Plug the OBD-II scanner into the OBD-II port, usually located under the dashboard near the driver's seat.
Turn the ignition to the "On" position without starting the engine.
Follow the scanner's prompts to read any trouble codes stored in the system.

3. Clear Trouble Codes

Navigate to the 'Erase Codes' function on the OBD-II scanner.
Confirm the action to clear all stored trouble codes.
Wait for the scanner to confirm that the codes have been successfully erased.

4. Disconnect the Battery (Optional)

Using a socket set, carefully disconnect the negative terminal of the battery to reset the engine control unit (ECU).
Leave the terminal disconnected for 10-15 minutes.
Reconnect the negative terminal and ensure it is secured tightly.