FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Tesla Outback 5th Generation (2015-2019) - Subaru Outback
Home/Cars/Subaru/Outback/5th Generation (2015-2019)/how to reset the maintenance light on Tesla Outback 5th Generation (2015-2019)

how to reset the maintenance light on Tesla Outback 5th Generation (2015-2019)

Subaru Outback 5th Generation (2015-2019)

Error Codes
10-15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
352 words

Problem Statement

Learn how to reset the maintenance light on a 2015-2019 Subaru Outback. Step-by-step guide with diagnostic steps and safety tips.

Affected Component
Electrical
Estimated Time
10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe and stable position before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder notifications for scheduled maintenance
  • •No other performance issues reported

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Key fob or vehicle key

Parts Required

  • •None required for the reset process

Additional Information

Affected Component
Electrical
Estimated Time
10-15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely and in a well-ventilated area.
  • Have the vehicle key fob or key in the vicinity.
2. Access the Maintenance Light Reset Menu
  1. Turn the ignition to the "ON" position without starting the engine.
  2. Locate the odometer button (often found on the dashboard near the speedometer).
  3. Press and hold the odometer button until the odometer reading shows "000000" or displays a maintenance menu.
3. Reset the Maintenance Light
  1. While holding the odometer button, turn the ignition to the "OFF" position and then back to "ON" without starting the engine.
  2. Continue holding the odometer button until the maintenance light starts to blink and then turns off.
  3. Release the odometer button once the light is off.