how to reset the tire pressure monitoring system (TPMS) in Tesla Outback

Subaru Outback 5th Generation (2015-2019)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

405 words

Problem Statement

Learn how to reset the TPMS in your Tesla Outback. Step-by-step guide with diagnostic procedures and tips for accurate tire pressure maintenance.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is parked on a level surface before checking tire pressures.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings displayed
•Warning message regarding tire pressure on the infotainment screen
•Vehicle handling issues due to improper tire pressure

Diagnostic Steps

1
Inspect all tires to ensure they are inflated to the recommended pressure levels.
2
Check for any visible damage or leaks in tires.
3
Verify that the TPMS sensors are functioning correctly (if applicable).
4
Ensure the vehicle is in the correct mode (Park) for resetting the TPMS.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Infotainment system interface

Parts Required

•None specifically required for reset

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather all necessary tools and equipment.
Ensure you have accurate tire pressure readings for all tires.

2. Inflate Tires

Inflate all tires to the recommended pressure as specified on the driver's side door jamb label.
Use a reliable tire pressure gauge to confirm that the pressures are correct.

3. Reset TPMS

Access the Vehicle Settings:
- Turn on the vehicle and navigate to the "Controls" menu on the infotainment screen.
Select the Service Option:
- Go to the "Service" section within the Controls menu.
Select TPMS Reset:
- Look for the option labeled "Reset TPMS" or "Calibrate TPMS" and select it.
Confirm Reset:
- Follow the on-screen prompts to confirm the TPMS reset.
- Wait for the system to process the reset, which may take a few moments.

4. Verify Tire Pressure

After resetting, check the tire pressures again to ensure they remain at the correct levels.
Monitor the TPMS light and ensure it turns off after a short drive.