how to troubleshoot the keyless entry not working in Tesla Outback?

Subaru Outback 5th Generation (2015-2019)

Error Codes

30 minutes to 1 hour

Time

medium

Difficulty

medium

Severity

3 min read

501 words

Problem Statement

Learn how to troubleshoot keyless entry issues in Tesla Outback. Step-by-step guide with diagnostic steps and repair instructions.

Affected Component

Electrical

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a secure location while troubleshooting to prevent theft or accidents.

Symptoms

•Key fob not recognized by the vehicle
•Vehicle does not respond to keyless entry commands
•No audible feedback (beeps) when pressing the key fob buttons
•Key fob battery low warning on the dashboard
•Inability to access the vehicle without using the mobile app or physical key

Diagnostic Steps

1
Inspect the key fob for physical damage or wear.
2
Replace the key fob battery to rule out low power.
3
Check for interference from other electronic devices nearby.
4
Test the key fob range by moving closer to the vehicle.
5
Scan the vehicle’s systems for error codes using a compatible Tesla diagnostic tool.
6
Ensure that the vehicle's software is up to date through the Tesla app or vehicle interface.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small screwdriver
•Tesla diagnostic tool

Parts Required

•CR2032 battery

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the key fob for physical damage or wear.
2
Replace the key fob battery to rule out low power.
3
Check for interference from other electronic devices nearby.
4
Test the key fob range by moving closer to the vehicle.
5
Scan the vehicle’s systems for error codes using a compatible Tesla diagnostic tool.
6
Ensure that the vehicle's software is up to date through the Tesla app or vehicle interface.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked in a safe and secure area.
Disconnect any devices that may interfere with keyless entry.

2. Replace Key Fob Battery

Open the key fob by sliding the cover off or using a small screwdriver to pry it open.
Remove the old battery and note the orientation.
Insert a new battery (usually CR2032) in the same orientation as the old one.
Reassemble the key fob, ensuring it snaps shut securely.

3. Check Vehicle Settings

Access the vehicle settings through the touchscreen interface.
Navigate to "Controls" > "Locks" and ensure that keyless entry is enabled.
If necessary, re-pair the key fob by following the on-screen instructions.

4. Update Vehicle Software

Connect the vehicle to Wi-Fi if not already connected.
Go to "Software" in the vehicle settings.
Check for available updates and follow the prompts to install.

5. Test Keyless Entry

After performing the above steps, test the keyless entry function.
Stand close to the vehicle and try locking/unlocking with the key fob.