my Tesla Outback 5th Generation (2015-2019) has excessive oil consumption what can I do

Subaru Outback 5th Generation (2015-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

511 words

Problem Statement

Learn how to diagnose and fix excessive oil consumption in Tesla Outback (2015-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before opening any components.
•Allow engine to cool before working on hot surfaces.
•Dispose of used oil and filter in accordance with local regulations.

Symptoms

•Check engine light illuminated
•Excessive smoke from the exhaust
•Oil warning light activation
•Frequent need for oil top-ups
•Decreased engine performance
•Possible oil leaks under the vehicle

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any related issues.
2
Inspect the oil level and condition using the dipstick.
3
Check for visible oil leaks around the engine and undercarriage.
4
Examine the exhaust for signs of oil burning.
5
Perform a compression test on the engine cylinders to assess internal wear.
6
Inspect the PCV (Positive Crankcase Ventilation) system for clogs or malfunctions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Pliers
•Torque wrench
•Scraper
•Oil filter wrench
•Oil drain pan
•Funnel

Parts Required

•New PCV valve
•Oil filter
•Engine oil (recommended type)
•Gaskets or sealants (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any related issues.
2
Inspect the oil level and condition using the dipstick.
3
Check for visible oil leaks around the engine and undercarriage.
4
Examine the exhaust for signs of oil burning.
5
Perform a compression test on the engine cylinders to assess internal wear.
6
Inspect the PCV (Positive Crankcase Ventilation) system for clogs or malfunctions.

Solution

1. Preparation

Gather tools and parts needed for repairs.
Ensure the vehicle is parked on a flat surface and the engine is cool.
Disconnect the battery to prevent accidental electrical issues.

2. Inspect and Replace PCV Valve

Sub-steps:
- Locate the PCV valve in the engine bay.
- Remove the PCV valve hose clamps and detach the valve.
- Inspect the old PCV valve for blockages or damage.
- Install the new PCV valve by reversing the removal steps.
Tools Required:
- Socket set
- Pliers

3. Repair Oil Leaks

Sub-steps:
- Identify the source of any oil leaks (e.g., gaskets, seals).
- Remove the damaged gasket or seal using a scraper.
- Clean the mating surfaces thoroughly.
- Apply a new gasket or sealant and reinstall the components.
Tools Required:
- Scraper
- Torque wrench (for reinstallation)
Safety Warnings: Allow engine to cool before working on hot surfaces.

4. Perform Engine Oil Change

Sub-steps:
- Drain the old oil by removing the oil drain plug.
- Replace the oil filter with a new one.
- Reinstall the drain plug and torque it to manufacturer's specifications.
- Fill the engine with the appropriate type and amount of oil.
Tools Required:
- Oil filter wrench
- Oil drain pan
- Funnel
Safety Warnings: Dispose of used oil and filter in accordance with local regulations.