FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Tesla Outback windshield wipers won’t turn off how to fix - Subaru Outback
Home/Cars/Subaru/Outback/5th Generation (2015-2019)/my Tesla Outback windshield wipers won’t turn off how to fix

my Tesla Outback windshield wipers won’t turn off how to fix

Subaru Outback 5th Generation (2015-2019)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
524 words

Problem Statement

Learn how to diagnose and fix windshield wipers that won't turn off in Tesla Outback. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the vehicle to cool before working on any engine or electrical components.

Symptoms

  • •Windshield wipers continuously running
  • •Wiper control stalk unresponsive
  • •Possible dashboard warning lights illuminated
  • •Intermittent wiper speed malfunction
  • •Wipers operate erratically

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Flathead screwdriver
  • •Socket set

Parts Required

  • •Replacement wiper control stalk (if damaged)
  • •Replacement wiper motor (if faulty)
  • •Replacement fuse (if blown)

Additional Information

Affected Component
Electrical
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: OBD-II scanner, multimeter, flathead screwdriver, and socket set.
  • Ensure the vehicle is turned off and parked safely.
2. Inspect Wiper Control Settings
  • Turn on the vehicle and navigate to the windshield wiper settings in the vehicle's interface.
  • Ensure that the wipers are not set to a continuous mode inadvertently.
  • If settings appear correct, proceed to the next step.
3. Check Wiper Control Stalk
  • Remove any debris around the wiper control stalk to ensure proper function.
  • If the stalk is damaged, replace it by:
    1. Disconnecting the vehicle's battery.
    2. Using a flathead screwdriver to gently pry off the stalk cover.
    3. Unscrewing the mounting screws and disconnecting the wiring harness.
    4. Installing the new stalk in reverse order.
4. Test and Replace Fuse
  • Locate the fuse box (refer to the vehicle’s manual for exact location).
  • Identify the fuse for the windshield wipers and use a multimeter to check for continuity.
  • If the fuse is blown, replace it with the same amperage rating (typically 10A to 20A).
5. Inspect Wiper Motor and Wiring
  • Disconnect the battery before working on electrical components.
  • Locate the wiper motor (usually under the windshield cowl).
  • Check for any loose or damaged wiring connections.
  • If the motor is faulty, remove it by:
    1. Unscrewing the mounting bolts.
    2. Disconnecting the wiring harness.
    3. Installing a new motor in reverse order.