FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
what does code P0700 mean for my Tesla Outback 5th Generation (2015-2019)? - Subaru Outback
Home/Cars/Subaru/Outback/5th Generation (2015-2019)/what does code P0700 mean for my Tesla Outback 5th Generation (2015-2019)?

what does code P0700 mean for my Tesla Outback 5th Generation (2015-2019)?

Subaru Outback 5th Generation (2015-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Error Code: P0700
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
506 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control malfunction in 2015-2019 Subaru Outback. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0700
Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before checking the transmission fluid.

Symptoms

  • •Check engine light illuminated
  • •Transmission slipping or erratic shifting
  • •Delayed engagement when shifting from park to drive
  • •Transmission overheating
  • •Poor acceleration or loss of power

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Torque wrench
  • •Fluid pump

Parts Required

  • •Transmission fluid
  • •Wiring harness or connectors (if damaged)
  • •Transmission control module (if faulty)

Additional Information

Error Code
P0700
Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the engine is off.
  • Disconnect the battery to prevent electrical shorts.
2. Inspect and Replace Transmission Fluid
  1. Remove the transmission fluid dipstick or fill plug.
  2. Check fluid level; add the appropriate fluid type if low.
  3. If fluid is dark or contaminated, proceed to replace it.
    • Tools Required: Socket set, fluid pump
    • Fluid Type: Refer to the owner’s manual for the correct type of transmission fluid.
  4. Drain the old transmission fluid from the pan and replace with new fluid.
  5. Reinstall the dipstick or fill plug securely.
3. Repair or Replace Wiring/Connectors
  1. Visually inspect the wiring harness and connectors related to the transmission control module.
  2. Repair any damaged wires or replace faulty connectors.
    • Tools Required: Wire strippers, soldering iron, heat shrink tubing
  3. Ensure all connections are secure.
4. Test Transmission Control Module
  1. Reconnect the battery and start the engine.
  2. Using a multimeter, check the voltage and ground signals at the transmission control module.
  3. Follow any specific testing procedures outlined in the service manual for the module.
  4. If the module is faulty, remove it and replace it with a new one.
    • Tools Required: Socket set, torque wrench
5. Clear Codes and Road Test
  1. Use the OBD-II scanner to clear any stored trouble codes.
  2. Perform a road test to confirm that the transmission operates normally without throwing a P0700 code.