FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why are my Tesla Outback's mirrors not adjusting properly - Subaru Outback
Home/Cars/Subaru/Outback/5th Generation (2015-2019)/why are my Tesla Outback's mirrors not adjusting properly

why are my Tesla Outback's mirrors not adjusting properly

Subaru Outback 5th Generation (2015-2019)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
531 words

Problem Statement

Learn how to diagnose and fix mirror adjustment issues in Tesla Outback. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems to avoid shorts or shocks.

Symptoms

  • •Mirrors do not respond to adjustment controls
  • •Check for warning lights on the dashboard related to mirrors
  • •Unusual noises during adjustment attempts
  • •Mirrors stuck in one position
  • •Driver-side or passenger-side mirror non-functional

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Trim removal tool
  • •Screwdriver set
  • •OBD-II scanner
  • •Fuse pullers
  • •Soldering iron

Parts Required

  • •Mirror adjustment switch (if faulty)
  • •Replacement fuses (if blown)
  • •Mirror assembly (if motor is faulty)

Additional Information

Affected Component
Electrical
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for the repair.
  • Disconnect the vehicle battery to ensure safety while working on electrical components.
2. Inspect and Replace the Mirror Adjustment Switch
  • Remove the trim panel surrounding the mirror adjustment switch using a trim removal tool.
  • Unscrew and detach the switch from the wiring harness.
  • Inspect the switch for signs of damage or malfunction.
  • If faulty, replace the switch with a new part.
  • Reconnect the switch and reinstall the trim panel.
3. Check and Replace Fuses
  • Locate the fuse box and identify the fuse associated with the mirror adjustment.
  • Remove the fuse using fuse pullers.
  • Inspect the fuse; if it is blown, replace it with a fuse of the same rating.
  • Reinstall the fuse box cover and reconnect the battery.
4. Repair Wiring Issues
  • If wiring damage is suspected, carefully inspect the wiring harness for any visible damage.
  • If any wires are frayed or broken, splice in new wire and solder connections securely.
  • Wrap the repaired areas with electrical tape to prevent future damage.
  • Reconnect any disconnected connectors.
5. Test Mirror Motors
  • If the adjustment switch and fuses are functional, remove the mirror assembly from the door.
  • Connect the mirror motor directly to a power source to test its operation.
  • If the motor does not function, replace the mirror assembly.