FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why is my Tesla Outback 5th Generation (2015-2019) fuel gauge not working - Subaru Outback
Home/Cars/Subaru/Outback/5th Generation (2015-2019)/why is my Tesla Outback 5th Generation (2015-2019) fuel gauge not working

why is my Tesla Outback 5th Generation (2015-2019) fuel gauge not working

Subaru Outback 5th Generation (2015-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
497 words

Problem Statement

Learn how to diagnose and fix the fuel gauge issue in Tesla Outback 5th Generation (2015-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow the fuel system to depressurize before servicing the fuel tank.

Symptoms

  • •Fuel gauge displays empty despite having fuel in the tank
  • •Fuel gauge fluctuates erratically while driving
  • •Warning light for low fuel is illuminated
  • •Vehicle performance issues due to incorrect fuel readings
  • •Difficulty in estimating remaining fuel range

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Torque wrench

Parts Required

  • •Fuel level sensor (if faulty)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for the repair.
  • Disconnect the battery to ensure electrical safety while working on the vehicle.
2. Inspect Fuel Level Sensor
  • Locate the fuel tank access point (usually under the rear seat or in the trunk).
  • Remove any necessary covers to access the fuel level sensor.
  • Disconnect the wiring harness from the fuel level sensor.
  • Use a multimeter to measure resistance across the sensor terminals; compare readings with manufacturer specifications.
3. Replace Fuel Level Sensor (if defective)
  • If the sensor is faulty, remove the retaining ring securing the fuel level sensor.
  • Carefully lift out the sensor from the fuel tank.
  • Install the new fuel level sensor by reversing the removal steps, ensuring it is seated properly.
  • Reconnect the wiring harness securely and replace any covers removed.
4. Reassemble Components
  • Reinstall any covers or seats that were removed during the inspection.
  • Reconnect the battery and ensure all connections are tight.
5. Calibration (if applicable)
  • Use diagnostic software to calibrate the fuel gauge if your model supports this function.
  • Follow on-screen instructions to complete the calibration process.