how to fix P0301 misfire code in Tesla Outback 6th Generation (2020-2024)

Solution

1. Preparation

• Gather tools and parts needed for repair.
• Tools Required: OBD-II scanner, socket set, torque wrench, compression tester, multimeter, fuel injector cleaner.
• Ensure the vehicle is parked on a level surface and the engine is cool.

2. Inspect and Replace Spark Plug

• Remove the ignition coil from cylinder 1.
  • Tools Required: Socket set.
  • Warning: Disconnect the battery before working on electrical systems.
• Remove the spark plug and inspect for wear, carbon buildup, or damage.
• If necessary, replace the spark plug with a new one that meets OEM specifications.
  • Torque the spark plug to the manufacturer's specified value (usually around 15-20 ft-lbs).

3. Inspect and Replace Ignition Coil

• If the spark plug is in good condition, inspect the ignition coil.
• If damaged, replace the ignition coil with an OEM part.
  • Reinstall the ignition coil and ensure it is securely connected.

4. Test and Clean Fuel Injector

• Remove the fuel injector for cylinder 1.
  • Tools Required: Socket set, fuel line disconnect tool.
• Inspect the injector for clogs or damage, and clean it using a fuel injector cleaner.
• Reinstall the fuel injector, ensuring proper seating and connections.

5. Perform Compression Test

• Use a compression tester to measure cylinder 1's compression.
• If the compression is below the acceptable range, further mechanical inspection may be required (e.g., checking piston rings or valves).