how to reset the seatbelt warning in my Tesla Outback 6th Generation (2020-2024)

Subaru Outback 6th Generation (2020-2024)

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

349 words

Problem Statement

Learn how to reset the seatbelt warning in your Tesla Outback 6th Generation (2020-2024). Step-by-step guide to resolve warning light issues.

Affected Component

Electrical

Estimated Time

15-30 minutes

Important safety information - read before proceeding

1
Ensure the vehicle is in the 'Park' position.
2
Check that all seatbelts are properly fastened to confirm that the warning is not due to an actual safety issue.
3
Access the vehicle's settings menu on the dashboard display.
4
Navigate to the 'Safety & Security' section.
5
Look for the option labeled 'Seatbelt Reminder' or similar and confirm its current status.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is in the 'Park' position.
2
Check that all seatbelts are properly fastened to confirm that the warning is not due to an actual safety issue.
3
Access the vehicle's settings menu on the dashboard display.
4
Navigate to the 'Safety & Security' section.
5
Look for the option labeled 'Seatbelt Reminder' or similar and confirm its current status.

Solution

1. Preparation

3. Reset the Seatbelt Warning

If the option to disable the seatbelt reminder is available, toggle it off and then back on.
If a specific reset option is available, select it to clear any warnings.
Exit the settings menu and observe if the warning light has turned off.